This is where I'm at for now.
Will probably go get the siding, and the rest of the materials I need tomorrow.
I used the cheapest, and smallest lumber I could for the frame in order to cut down on expense, and weight.
The hexagon floor base is made from 2"X2" pine boards, and all gusseted.
The deck is made from 3/4" sub flooring plywood.
The wall studs are 1"x2"X8', and double set at each corner.
The top hexagon is the same as the bottom
Sides - 4 ft
Height - 8 ft
Side to opposing side - 6.9282 ft
Corner to opposing corner - 8 ft
Area - 51.5692 ft
More to come as I get the siding, and roof materials for it.
Rick
Will probably go get the siding, and the rest of the materials I need tomorrow.
I used the cheapest, and smallest lumber I could for the frame in order to cut down on expense, and weight.
The hexagon floor base is made from 2"X2" pine boards, and all gusseted.
The deck is made from 3/4" sub flooring plywood.
The wall studs are 1"x2"X8', and double set at each corner.
The top hexagon is the same as the bottom
Sides - 4 ft
Height - 8 ft
Side to opposing side - 6.9282 ft
Corner to opposing corner - 8 ft
Area - 51.5692 ft
More to come as I get the siding, and roof materials for it.
Rick
Comment