Is this filter clogged?

[Quackerbox]

[emoji54][emoji15]


No, it's not my tractor. Borrowed to clear up some hydroaxe debris and it didnt seem to have all its power. Got it home and find this.


I'm draining all the fuel and replacing filters before I return it. Anyone know if a 3 cylinder yanmar has a primer pump or am I loosening injector lines.

Sent from my SM-G930V using Tapatalk

[DUKFVR]

Dang!

[Smart]

holy hell

[Nock This]

Give it another year.

[NSpannTX]

I’d say thats your problem.
No primer pump. After filter change you should be able to purge air out of the phillips head screw above shutoff valve watching filter bulb to make sure it fills up. Unscrew it a bit and pull the decompression handle and turn tractor over for a few seconds. Tighten screw and push in decompression handle and fire it up. If it still wont start purge through injection lines.

[Mexico]

It'll be alright, just spit on it.

[boy wonder]

Is that the new one ?

[Bowtech38]

I have customers all the time with filters like that

[be12hunt]

Just knock the big chunks off and roll on.

[Quackerbox]

I’d say thats your problem.
No primer pump. After filter change you should be able to purge air out of the phillips head screw above shutoff valve watching filter bulb to make sure it fills up. Unscrew it a bit and pull the decompression handle and turn tractor over for a few seconds. Tighten screw and push in decompression handle and fire it up. If it still wont start purge through injection lines.

This handle is located where? I looked for a plunger like ours has and didnt see that or a handle. But I wasnt looking very hard

It'll be alright, just spit on it.

That's for a different sort of clog.....[emoji16]

Sent from my SM-G930V using Tapatalk

[shiner78]

That's the electricity priming pump to the right of the rusty screen? I see wires going to it? No?

Sent from my SM-T580 using Tapatalk

[M16]

I’d just crack one of the injector lines if they are easy to get to.

[Quackerbox]

That's the electricity priming pump to the right of the rusty screen? I see wires going to it? No?

Sent from my SM-T580 using Tapatalk

I believe so.

I’d just crack one of the injector lines if they are easy to get to.

Yes sir. Theyre right on top

[Softballdad]

any plans to clean the tank? That rust needs to be addressed.

[Tx.Fisher]

Just spray a little Wd-40 on it and tap it with a rubber mallet....