I am looking at replacing my HHA sight. What do y'all recommend for a single pin slider that I don't have to shoot at 20 and then 60.
Announcement
Collapse
No announcement yet.
Site Recommendations
Collapse
X
-
Originally posted by Russ26 View PostThanks for posting, I'm in the same boat. What don't you like about your HHA?
Sent from my SM-G973U using Tapatalk
Comment
-
Black gold sights come with tapes based off chronograph speed.
They’re close, but every one of the 20-60 sight tapes are a ballpark figure. This is because the average guy’s peep sight is 5 and a half inches from the D-loop but it can change dramatically with short ata bows and long draw lengths.
The reacts are good too, if you like imported stuff.
The most accurate way to set tapes will either through an aftermarket program or by shooting 20-100. I take painters tape and mark 20 then work my way back to 100 yards and mark it. After that, I peel the tape off and measure the distance with a set of calipers and then match that up to the sight tapes from the manufacturer.
If you use a program to make custom sight tapes, here are a lot of measurements that have to be taken into account such as distance from the arrow to the peep at full draw, draw length, arrow diameter, etc.
Comment
Comment