Need gunsmith barrel threaded dfw - TexasBowhunter.com Community Discussion Forums

topshot · 09-05-2021, 02:26 PM

I have a ruger 77/44 that I'd like to surpress, but the barrel that came from factory is short and has iron sights. I don't know if it can even be threaded and remain suitable.

Any fort worth area gunsmith here want to give it a go or swap the barrel for me?

Thanks

TCB · 09-05-2021, 10:55 PM

Morgan at Class 3 Machining. He’s done 4 for me and all perfect.

www.class3machining.com

kmon · 09-06-2021, 05:09 PM

Quote:

Originally Posted by TCB

Morgan at Class 3 Machining. He’s done 4 for me and all perfect.

www.class3machining.com

X2

bearintex · 09-07-2021, 06:45 AM

X3 for Morgan.

JONES45LC · 09-07-2021, 07:34 AM

take it to alamo precision

topshot · 09-22-2021, 09:41 AM

Alamo no response again
Morgan offers service by mail only if stripped to barreled action only.

DirtyDave · 09-22-2021, 10:29 AM

Maybe try S&S precision?

Mike D · 09-22-2021, 08:19 PM

Morgan Richie.

Sent from my iPhone using Tapatalk Pro

BLACKFINTURKEY · 09-23-2021, 07:02 PM

Morgan will only do it if the barrel has been removed from action.

Mike D · 09-23-2021, 08:21 PM

Quote:

Originally Posted by BLACKFINTURKEY

Morgan will only do it if the barrel has been removed from action.

Is that a recent change?

I’ve had him thread several and on bolt guns I only had to remove it from the stock and take off the bolt & trigger.

He also did an M&P 22 and a Rossi 357 lever gun and I never removed those barrels.

Sent from my iPhone using Tapatalk Pro

BLACKFINTURKEY · 09-23-2021, 08:23 PM

Quote:

Originally Posted by Mike D

Is that a recent change?

I’ve had him thread several and on bolt guns I only had to remove it from the stock and take off the bolt & trigger.

He also did an M&P 22 and a Rossi 357 lever gun and I never removed those barrels.

Sent from my iPhone using Tapatalk Pro

Maybe he will I know he told me this week every thing has to be removed from barrel so I’m not sure if that is action too.

Sent from my iPhone using Tapatalk

Mike D · 09-23-2021, 09:45 PM

Quote:

Originally Posted by BLACKFINTURKEY

Maybe he will I know he told me this week every thing has to be removed from barrel so I’m not sure if that is action too.

Sent from my iPhone using Tapatalk

I would clarify with him. Anything that can come off and get lost or keep him from chucking it up in his lathe is what he would need removed.

Sent from my iPhone using Tapatalk Pro

Fmjag64 · 01-15-2023, 12:33 PM

Bump on this. Anyone have anywhere in the DFW area to drop gun off to get threaded?

JakeGraves · 01-15-2023, 04:02 PM

Quote:

Originally Posted by Fmjag64

Bump on this. Anyone have anywhere in the DFW area to drop gun off to get threaded?

Call Mikael at S&S Precision in Denton

scott123456789 · 01-17-2023, 12:24 PM

Quote:

Originally Posted by Fmjag64

Bump on this. Anyone have anywhere in the DFW area to drop gun off to get threaded?

Still Morgan at Class III. 1-2 week turn around and he has probably threaded more than any smith in the country.

muzzlebrake · 01-27-2023, 09:18 AM

Quote:

Originally Posted by Fmjag64

Bump on this. Anyone have anywhere in the DFW area to drop gun off to get threaded?

EGA
Euless Guns & Ammo
Talk to Larry or Nick

coop2564 · 01-17-2023, 09:44 AM

I had mine done at Alamo.

aggieman08 · 01-26-2023, 08:49 PM

Does Morgan require ARs barrels to be removed or will he take an upper?

Abcdj · 01-26-2023, 09:27 PM

Trammels gunsmithing in Breckenridge if it's not to far.

09-05-2021, 02:26 PM	#1
topshot Ten Point Join Date: Sep 2014 Location: SouthWest Fort Worth Hunt In: Public land	Need gunsmith barrel threaded dfw I have a ruger 77/44 that I'd like to surpress, but the barrel that came from factory is short and has iron sights. I don't know if it can even be threaded and remain suitable. Any fort worth area gunsmith here want to give it a go or swap the barrel for me? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-05-2021, 10:55 PM	#2
TCB Ten Point Join Date: Oct 2007 Location: Denton, Tx	Morgan at Class 3 Machining. He’s done 4 for me and all perfect. www.class3machining.com

09-07-2021, 06:45 AM	#4
bearintex Pope & Young Join Date: Mar 2007 Location: Angleton Hunt In: 20 minutes from the house!	X3 for Morgan.

09-07-2021, 07:34 AM	#5
JONES45LC Ten Point Join Date: Mar 2011 Location: bandera / pipecreek tx Hunt In: edwards, real, medina, kerr counties	take it to alamo precision

09-22-2021, 09:41 AM	#6
topshot Ten Point Join Date: Sep 2014 Location: SouthWest Fort Worth Hunt In: Public land	Alamo no response again Morgan offers service by mail only if stripped to barreled action only.

09-22-2021, 10:29 AM	#7
DirtyDave Ten Point Join Date: Apr 2014 Location: Decatur	Maybe try S&S precision?

09-22-2021, 08:19 PM	#8
Mike D Pope & Young Join Date: Oct 2006 Location: North Texas Hunt In: Haskell County, TX	Morgan Richie. Sent from my iPhone using Tapatalk Pro

09-23-2021, 07:02 PM	#9
BLACKFINTURKEY Pope & Young Join Date: Oct 2015 Location: Marion,Texas Hunt In: Marion,Texas	Morgan will only do it if the barrel has been removed from action.

01-15-2023, 12:33 PM	#13
Fmjag64 Ten Point Join Date: Nov 2013 Location: Texas Hunt In: TX	Bump on this. Anyone have anywhere in the DFW area to drop gun off to get threaded?

01-17-2023, 09:44 AM	#17
coop2564 Ten Point Join Date: Oct 2006 Location: Azle, Tx Hunt In: STX, NTX, OK and Louisiana!	I had mine done at Alamo.

01-26-2023, 08:49 PM	#18
aggieman08 Ten Point Join Date: Oct 2012	Does Morgan require ARs barrels to be removed or will he take an upper?

01-26-2023, 09:27 PM	#19
Abcdj Pope & Young Join Date: Jan 2014 Location: The Can Hunt In: Wilbarger	Trammels gunsmithing in Breckenridge if it's not to far.