Can I carry 16 ft cattle panels on a 12 ft single axle trailer? I need to set up a feeder pen and that is as big of trailer I have. It’s wide enough but there going be hanging off 4 ft. I thought about hooking two ratchet straps to the end hanging off and pulling them in a small curve? Thought it might work with a few but I don’t know about 10 or 11. What do you guys think?
Announcement
Collapse
No announcement yet.
Trailer guys
Collapse
X
-
Like said above, overhang the front a foot or so. On the back end...if it looks like they wills ag and drag... run a strap across the back about half way or so and another strap from the end of the panels to the strap to keep it from sagging.
little wear & tear won't hurt too bad... and will keep folks from tailgating with the sparks
Comment
-
You can bend 1 or 2 and tie the ends and strap them down. You ain’t doing it with 11 panels. I had to build a H with 2x4 and turn the boards on their edge I put a 2nd cross bar at the top of the H and laid the panels on top. I used 14ft 2x4. My trailer floor is metal had it been wood it would have made things easier. This keep them from dragging on the road.
Comment
Comment