I’m removing the columns. Cutting the arched straight. Looking for ideas of what would look good. Wanting a rustic look.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Last edited by ecfire1967; 06-06-2021, 01:29 PM. -
Originally posted by ecfire1967 View Post
Have any pics? I’m betting the columns are structural
Sent from my iPhone using Tapatalk Pro -
Originally posted by FLASH_OUTDOORS View Post
The columns are loose. Not weight bearing
Sent from my iPhone using TapatalkComment
-
Originally posted by FLASH_OUTDOORS View Post
Forgot the pics…updated the post
Sent from my iPhone using TapatalkComment
-
I would go back with rough cut cedar posts. Those columns may be loose at the moment but I bet they were initially load bearing. Put posts. that’s a lot of weight overhead.
Tons of rustic trim designs on that rough cut cedar.
Sent from my iPhone using Tapatalk ProComment
-
I would also suggest removing that bush in the middle of the patio
Sent from my iPhone using Tapatalk ProComment
-
I can’t tell from the pic but repaint the top of the porch and put board and batten up there. What’s there now. If it’s smooth and good still it could be real simple to give it the board and batten look.
Sent from my iPhone using Tapatalk ProComment
-
Originally posted by FLASH_OUTDOORS View Post
Bush is gone. Thinking about covering the brick with a German Schmeer or white paint.
Sent from my iPhone using TapatalkComment
-
Update landscaping to highlight porchComment
-
Call Chip and Joanna they will fix it for you LOLComment
-
Comment
-
I added these rails last year… cause my wife looked on Pinterest. I built from 2x4 rectangular tubing.
If I had it to do over I’d prefer to be hit in the groin with a sledgehammerAttached FilesComment
-
-
Those bushes need to go.Comment
-
Probably not what you’re looking for but we are in the process of remodeling our porch.
First I built the shutters for all the front windows of the house and then took out the old railings and built this design. When the wife is through painting and staining, we will add a large iron lone star to the center. We did the design to resemble an old farm gate.
Comment
-
Comment