Bad day mowing

[Strummer]

I did this a few days ago with my shredded . Not near as bad .

[texan16]

Yep, that will definitely make ya say some choice words. Pair of Kleins and a beer and you are back in business.

[kingranch]

4inch grinder cutting disc
5 mins and its all off

[Hogmauler]

Just put a little Dawn on it, and it will pull right out.
Releases the spring in the steel.

Lmao!

[nbrantr]

I had a similar experience but with a water hose

[Kingfisher789]

Id torch or cutoff wheel on a grinder before id pull the blade. Good luck

Cut off wheel and some needle nose vise grips.

[Rubi513]

Cut off wheel and some needle nose vise grips.

Am I missing something, is that not a small lawn mower blade?

[friscopaint]

Mine is generally lead ropes from horses the wife just drops when done with them......

[Philip-TX]

Am I missing something, is that not a small lawn mower blade?

Looks like it

Drop the blade and pull it out

[bowhntrmatt]

That’s a bad time! Did it with an 8’ brush hog and barbed wire once. Not something i’d like to repeat.

In your case, if its only on the one blade, unbolt the blade and the whole bundle will drop out, then just slide the blade out. No/minimal cutting needed.

[BrianL]

It's not the wire that's bad it is all the poison ivy oil under the shredder.... Torch, grinder, or 18" bolt cutters will make fairly easy work of the wire.

[TonyP]

Lol!

Pull the blade off would be the easiest route.
Been there, done that.

That's what I did, after cussing the wire for a good while

[LivinADream]

My lawnmower looks the same right now, except with an extension cord. Daughter ran over it a few days ago. [emoji849]

Sent from my motorola one 5G UW using Tapatalk

[skinsfan]

Cutting torch!

[tpack]

Take the blade off and it will slide off.