Too high?

[solocam_aggie]

Think my new scope sits too high? I let the dang Cabelas guy talk me into the rings even though I was pretty sure the lows would work.

Sent from my SM-G892A using Tapatalk

[Raypo]

It’s fine. As long it’s comfortable.

[Drycreek3189]

It’s fine. As long it’s comfortable.

[gig one]

If it's a 50mm I think the low are to short they were on mine

[STX_Shooter]

Those will work, as long as you can get a comfortable cheek weld on the stock. What I like to do is close your eyes bring the rifle to a shooting position get a good comfortable cheek weld with your neck in a comfortable position and the open your eyes. This will tell you if you need to adjust the height or distance of scope for the eye relief.

[Patriot-2000]

Anything above 44 will probably require Medium but not all rings are created equal and some sit lower than others.
Make sure you get enough bolt clearance when working the action ..

[Killer Miller]

Looks good to me.

[Rhettsker]

Those will work, as long as you can get a comfortable cheek weld on the stock. What I like to do is close your eyes bring the rifle to a shooting position get a good comfortable cheek weld with your neck in a comfortable position and the open your eyes. This will tell you if you need to adjust the height or distance of scope for the eye relief.

This is the correct answer. You want a good cheek weld, not a chin weld for consistent shooting.

[Arrowflinger84]

looks fine to me

[forced-2-work]

Looks good to me. Mine are all set like that. I dont like my scope touching my barrels!

[TacticalCowboy]

Looks fine

[Mustang6867]

As long as you are comfortable and don't have to fight to see down the scope when your cheek is on the stock you are good.

[hog_down]

As long as you are comfortable and don't have to fight to see down the scope when your cheek is on the stock you are good.

Agreed, same thing I thought.

[kingranch]

Looks great
Now your flip scope covers will fit perfectly

[Tomkat70]

Looks good. But does it work for you ?