Announcement

Collapse
No announcement yet.

Need a little help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need a little help

    I have 3 arrows all the same 500 spine all have same weight on front, 1 arrow is about a half inch shorter than the other two. The 2 longer arrows fly straight. the other arrow hits target knock left. I thought knock left meant under spined how can this be if it is shorter? Thanks

    #2
    You're getting a false weak because it's bouncing off the riser. Add about 10 or 15 grains up front. The little brass rings will work.

    Sent from my SM-G892A using Tapatalk

    Comment


      #3
      May be a dumb question, but are you shooting right or left handed?

      Comment


        #4
        Chart
        Attached Files

        Comment


          #5
          If you're right handed, left means stiff.
          The shorter arrow is stiffer than the longer ones if all else is equal.

          Comment


            #6
            Originally posted by DRT View Post
            You're getting a false weak because it's bouncing off the riser. Add about 10 or 15 grains up front. The little brass rings will work.

            Sent from my SM-G892A using Tapatalk
            I've done the same thing. Added 10gr on some 400 spine shafts that SOMEBODY cut 3/8" too short. They don't fly exactly the same, but do seem to hit repeatedly close enough to all the others that I can't tell much diffence out to 20 yards.

            Comment

            Working...
            X