Home Arrow Shop Questions - TexasBowhunter.com Community Discussion Forums

Foxtrot · 01-17-2021, 07:10 PM

I’ve been fletching my own arrows for a while. I’ve been using the Bohning Tower Jig.

Im about to set up a nice arrow station in my shop. I’ve ordered a scale and a Bitzenburger jig. I wanted a Jojan multi fletch but couldnt find one. Im ok with that.

I just ordered a bunch of Blazer vanes on Ebay to have plenty available.

Im looming at arrow saws now. I want an arrow saw, not a Harbor Freight saw.

Any suggestions on saw? Any pics of set ups? I have a bench set up already in the shop as it used to be a leather working shop.

Im looking forward to this adventure, saving a few $’s and helping a few buddies out

muddyfuzzy · 01-17-2021, 08:06 PM

My 8k rpm Weston has cut close to 5k shafts for me. About to change my first cutting wheel. I’ll but another one when the times comes. I bought it off a TBH’r back in 2013, best 59 bucks I ever spent. I like the built in arrow spinners too.

Sent from my iPhone using Tapatalk

IbeHuntn · 01-19-2021, 09:46 PM

One of your best investments after getting your saw will be a arrow squaring tool. It will make a huge difference in broad head flight.

Sent from my iPhone using Tapatalk

Barrett · 01-30-2021, 06:34 AM

I got the Revolution given to me for Xmas. Been great so far,

twosixteens · 01-30-2021, 06:38 AM

Make sure saw has a dust collection system is all I got

01-17-2021, 07:10 PM	#1
Foxtrot Four Point Join Date: Apr 2019 Location: Holland America Hunt In: Looking!	Home Arrow Shop Questions I’ve been fletching my own arrows for a while. I’ve been using the Bohning Tower Jig. Im about to set up a nice arrow station in my shop. I’ve ordered a scale and a Bitzenburger jig. I wanted a Jojan multi fletch but couldnt find one. Im ok with that. I just ordered a bunch of Blazer vanes on Ebay to have plenty available. Im looming at arrow saws now. I want an arrow saw, not a Harbor Freight saw. Any suggestions on saw? Any pics of set ups? I have a bench set up already in the shop as it used to be a leather working shop. Im looking forward to this adventure, saving a few $’s and helping a few buddies out

01-17-2021, 08:06 PM	#2
muddyfuzzy Pope & Young Join Date: Aug 2011 Location: gulf coast Hunt In: Parts Unknown	Home Arrow Shop Questions My 8k rpm Weston has cut close to 5k shafts for me. About to change my first cutting wheel. I’ll but another one when the times comes. I bought it off a TBH’r back in 2013, best 59 bucks I ever spent. I like the built in arrow spinners too. Sent from my iPhone using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-19-2021, 09:46 PM	#3
IbeHuntn Ten Point Join Date: Apr 2011 Location: Brazoria County Hunt In: Live oak County	One of your best investments after getting your saw will be a arrow squaring tool. It will make a huge difference in broad head flight. Sent from my iPhone using Tapatalk

01-30-2021, 06:34 AM	#4
Barrett Ten Point Join Date: Oct 2012 Location: Apache Shores Hunt In: Tarpley	I got the Revolution given to me for Xmas. Been great so far,

01-30-2021, 06:38 AM	#5
twosixteens Pope & Young Join Date: Aug 2013 Location: North Texas Hunt In: Young County Mostly Mack’s Creek Missouri on occasion	Make sure saw has a dust collection system is all I got