For the above, I really want Weld Prostar wheels. Proving tough to find in a 5x5 so I found Vision wheels 521 Nitro Wheels. Per articles online I need a 15x10 rear with a 5" backspace. These come in a 4.5" so I'm thinking I can just run a spacer if need be- is that correct. Tougher question is the fronts. I need 15x8 with a 4" BS but these only come in a 4.5 or 5.5. Anyone know if the 4.5 will still work?
-
For the above, I really want Weld Prostar wheels. Proving tough to find in a 5x5 so I found Vision wheels 521 Nitro Wheels. Per articles online I need a 15x10 rear with a 5" backspace. These come in a 4.5" so I'm thinking I can just run a spacer if need be- is that correct. Tougher question is the fronts. I need 15x8 with a 4" BS but these only come in a 4.5 or 5.5. Anyone know if the 4.5 will still work? -
Putting a spacer on a wheel lessens backspacing/increases offset. It would stick out further.
You’d want to go with the 5.5” set and a 1/2” spacer to achieve 5” of backspacing or 4.5” with the spacer to get 4”. -
I have some 5x5s that you can borrow for a test fit sirComment
Comment