Barb wire cart failure

[CoolArrow]

Im trying to build a barb wire cart and I failed. Anyone built one before? If so can you please a pic of what you did.

What I built might be ok to haul wire around but wire spool don’t spin

.





Sent from my iPhone using Tapatalk

[oktx]

Spool needs to be horizontal?

[CoolArrow]

I’m tired of fooling with this darn thing. It’s beer thirty somewhere

[CoolArrow]

Mr Dale Moser in the house? That guy is a freakin genius

[huntmaster]

as oktx said spool should be horizontal

[txpitdog]

Just add a second plate for the spool to sit on, then put motor oil between the two plates of metal. That will reduce the friction enough for the spool to rotate.

[CoolArrow]

Ok I will go horizontal. But what do y’all suggest I do to keep the cart from rolling forward? I welded that kick stand on the front to keep it somewhat upright. I drilled two holes near top and bottom and placed a pin to hold in position.

Thanks

[CoolArrow]

It’s got a plate on the bottom. But it won’t spin and if I pull to hard the whole thing moves.

I got some scrap 2 inch angle iron and i will go horizontal. That should work


Sent from my iPhone using Tapatalk

[oktx]

Tie your wire off and pull the cart.

[drs]

Put a plow disk on it it will work great

[Big pig]

Tie your wire off and pull the cart.

Horizontal. That’s what we did. Hard to keep it from spinning off too much unless you have a brake or some friction.

BP

[doright]

When I was a kid we had an old lawnmower handle with the wire on a piece of pipe between the forks. I hated it but it worked.

[TeamAmerica]

You sure your HOA is gonna approve a barb wire fence? [emoji6]

Sent from my SM-G973U using Tapatalk

[Palmetto]

Tie your wire off and pull the cart.

Put a plow disk on it it will work great

This.....You trying too hard...LOL.

This is how it was meant to be used.

When I was a kid we had an old lawnmower handle with the wire on a piece of pipe between the forks. I hated it but it worked.

We have one like this as well, and works great for small patch jobs.

[kck]

Mr Dale Moser in the house? That guy is a freakin genius

Please don’t let Moser see this. We’ll never hear the end of it!!!