Obsession Evolution, draw length adjustment

[jshouse]

Maybe a dumb question but....I had a bow tech set me up with this bow a few years ago and it's either at 28.5" or 29" draw, I don't know if I've become more limber in my old age but when I draw it now I feel like I am hitting the stops too soon. If I just loosen and slide the stops back evenly, say .25" each, will that give me a little more draw? Will it affect the cam timing or anything else?

I know I'll have to sight it in again but don't want to have to re-tune or anything, if it's a big deal I'll just shoot it how it is.

Thanks

[rocky]

If you’re saying 1/4 inch DL, you should be fine. If you’re saying to actually adjust the stops by 1/4”, you will significantly lengthen DL, and the bow will have to be retuned, and on some binary bows, it won’t tune well.

[jshouse]

If you’re saying 1/4 inch DL, you should be fine. If you’re saying to actually adjust the stops by 1/4”, you will significantly lengthen DL, and the bow will have to be retuned, and on some binary bows, it won’t tune well.

Ok that's what I was afraid of. I'll just leave it be, thanks