BOW TECH Cams ?????

[BIGMACK]

I recently purchased a 2004 Patriot with Samson 80lb limbs.
The bow has a very slightly bent cam from being dry fired.

I believe the bow has an Infinity cam because of the “I 4” on the module and the Infinity was the more used cam of the time. At least that’s what my research tells me.

I contacted BOW TECH and a rep told me of another cam “D3.5” that was in stock that would replace the Infinity but would not give me a price.(dealer only)

So where can I get an Infinity cam with an I1 module, or a D3.5 cam with a DU1 module?
I found a SW3.5 cam that looks similar to the Infinity,
But I know she said D3.5 cam

I would greatly appreciate if someone could shed some light on this!

[BIGMACK]

Here's some pix..
First two are the SW3.5 I found
The next two are the Infinity cam

[BTLowry]

Archerytalk.com classifieds and search is where I would start

They have a classifieds forum dedicated to parts like cams and such

You might get lucky

[BIGMACK]

thanks

[rocky]

Here's some pix..
First two are the SW3.5 I found
The next two are the Infinity cam

I have the cam that preceded the infinity cam and used a DS1 mod for 30 inch dL. The difference is that the Infinity cam had a limb draw stop, and the predecessor was a cable stop cam. Might work, might not due to possible different string and cable lengths. I’d have to go back in my charts to find out.