Cutting a Propane Tank - Page 2 - TexasBowhunter.com Community Discussion Forums

Philip-TX · 01-23-2021, 07:18 AM

Dale what is the red thing on the tripod base, in the back? Blower of some sort?

Pstraw · 01-23-2021, 07:58 AM

Nothin to it. Now to get on with the project.

Rotag · 01-23-2021, 09:08 AM

Just send it

Sent from my iPhone using Tapatalk Pro

Dale Moser · 01-23-2021, 12:39 PM

Quote:

Originally Posted by Philip-TX

Dale what is the red thing on the tripod base, in the back? Blower of some sort?

My son’s pitching machine that doesn’t work worth a ****, but is always in my way.

Sent from my iPhone using Tapatalk

Dale Moser · 01-23-2021, 12:40 PM

I got some more done last night, but it won’t let me post a picture right now.

Sent from my iPhone using Tapatalk

Dale Moser · 01-23-2021, 01:25 PM

Sent from my iPhone using Tapatalk

Mike D · 01-23-2021, 09:56 PM

Where ya planning on puttin this Dale? We had one at the lease when I lived in Mississippi. We used to stuff it full of pine logs and it would get red hot. Couldn’t get closer than 5’ to it the heat was so intense.

Sent from my iPhone using Tapatalk Pro

Dale Moser · 01-23-2021, 10:03 PM

Gonna put it under the party porch at camp for when it’s raining, or too windy for a camp fire. 5’ of radiant heat would exceed expectations, I just hope it makes it tolerable under there and doesn’t smoke to much.

Sent from my iPhone using Tapatalk

bboswell · 01-23-2021, 11:27 PM

In for another Moser build!

Dale Moser · 01-27-2021, 11:45 PM

Gettin...somewhere..

Sent from my iPhone using Tapatalk

Dale Moser · 01-27-2021, 11:47 PM

Built the door, but havnt bought the hinges, and I don’t feel like making them.

Sent from my iPhone using Tapatalk

RR 314 · 01-28-2021, 05:15 PM

Man, you weld pretty dang well for a brick guy. Haaaa. Seriously, looks great.

Agdog · 02-03-2021, 08:25 AM

Bender get finished up yet Dale?

cva34 · 02-03-2021, 08:52 AM

Quote:

Originally Posted by Dale Moser

I'm gonna cut it with a cutoff wheel. I'll start with it full of water, be carefull with my cords, and see how it goes.

I've been electrocuted plenty of times, I'll take my chances with that. Bein blowed up sounds less fun.

I got 2 dewalt 20v and i ryobi 18v////4 1/2 angle grinders...They all get lots of use...havent use a 120 AC Big grinder in years they collect Dust....

I got a milwaukee 12v saber saw that with right blade would geter done too.and no sparks compared to a grinder

Dale Moser · 02-03-2021, 10:07 AM

Quote:

Originally Posted by Agdog

Bender get finished up yet Dale?

Havn't done any work since Friday night, but I did get the torch hauled over from dad's, and my hinges came in yesterday.

I started on the air shutter, and the door latch Friday.

TexasBob · 02-03-2021, 10:17 AM

Missed this before. We need something similar for deer camp next year. Not sure exactly what yet but this inspires me

3ChordTruth · 02-04-2021, 07:05 PM

Quote:

Originally Posted by Agdog

Bender get finished up yet Dale?

X2 on the “Bender” name!

Dale Moser · 02-04-2021, 11:18 PM

Hinges showed up, and they’re a little bigger/more awkward than I hoped, but nothin on this was ever meant to pretty.

Sent from my iPhone using Tapatalk

Dale Moser · 02-04-2021, 11:20 PM

Got the air shutter finished and put in.

Sent from my iPhone using Tapatalk

Dale Moser · 02-04-2021, 11:20 PM

Sent from my iPhone using Tapatalk

Dale Moser · 02-04-2021, 11:22 PM

As we set.

Sent from my iPhone using Tapatalk

Artos · 02-04-2021, 11:28 PM

DoveBlaster · 02-05-2021, 08:03 AM

Hell yeah, looks awesome.

Mike D · 02-05-2021, 08:48 AM

Quote:

Originally Posted by Dale Moser

As we set.

Sent from my iPhone using Tapatalk

**** that’s wayyyy more fancy than the one we had. Screw in draft control, pffffft open the door in the bottom! That’s when that sucker would get red hot.

How did you radius the flat bar or angle on the part that looks like a drawer on bottom? What size flue pipe are you gonna have?

Sent from my iPhone using Tapatalk Pro

bboswell · 02-05-2021, 08:48 AM

Strong

bobc · 02-05-2021, 09:36 AM

Excellent work as expected. Looking good.

Hardware · 02-05-2021, 10:13 AM

When is the test run???

hog_down · 02-05-2021, 10:15 AM

very nice! did you make or buy your hinges?

Ouch · 02-05-2021, 11:48 AM

Son. Of. A. *****.

Dale Moser · 02-05-2021, 12:48 PM

Quote:

Originally Posted by Mike D

**** that’s wayyyy more fancy than the one we had. Screw in draft control, pffffft open the door in the bottom! That’s when that sucker would get red hot.

How did you radius the flat bar or angle on the part that looks like a drawer on bottom? What size flue pipe are you gonna have?

Sent from my iPhone using Tapatalk Pro

I just bent it around the tank. It will have a 6” flue.

Sent from my iPhone using Tapatalk

Dale Moser · 02-05-2021, 12:49 PM

Sent from my iPhone using Tapatalk

Dale Moser · 02-05-2021, 12:50 PM

I bought the hinges.

Sent from my iPhone using Tapatalk

Texas Grown · 02-05-2021, 06:00 PM

Quote:

Originally Posted by Dale Moser

I bought the hinges.

Sent from my iPhone using Tapatalk

I don't blame ya one bit either! I would have.

Dale Moser · 02-06-2021, 09:58 PM

Got paint on, just need fire now. I hope it works!

Sent from my iPhone using Tapatalk

bboswell · 02-06-2021, 10:05 PM

It works, I can tell from here

Texas Grown · 02-07-2021, 06:48 PM

Thats a dang nice heater Dale!

3ChordTruth · 02-07-2021, 07:16 PM

Bender turned out lookin’ good, bring on the cold and fire it up.

J-Fish · 02-07-2021, 07:35 PM

Quote:

Originally Posted by Bowhuntingobsession

As a precaution video it. That way if it does blow someone else will learn from your mistake !

Best idea in all the threads!

Dale Moser · 02-12-2021, 06:54 PM

Sent from my iPhone using Tapatalk

Artos · 02-12-2021, 07:04 PM

sweet!!

bboswell · 02-12-2021, 09:16 PM

That tin is gonna turn colors shortly

Dale Moser · 02-12-2021, 09:30 PM

Sent from my iPhone using Tapatalk

Dale Moser · 02-12-2021, 09:32 PM

The tin situation is gonna get re worked when time allows, this is somewhat temporary because it’s ****in cold. The radiant heat is impressive, still learning the air input, I think we need an adjustable damper, but I allowed for that. So far it has exceeded expectations.

It’s cold out here.

Sent from my iPhone using Tapatalk

Strummer · 02-12-2021, 09:35 PM

That’s nice .

ATI · 02-12-2021, 09:49 PM

That thing is sweet, Well done!
I can never get enough of gear and equipment that have anything to do with building a fire.

Bob G · 02-12-2021, 09:53 PM

Quote:

Originally Posted by Dale Moser

I bought the hinges.

Sent from my iPhone using Tapatalk

Where do you get those?

tending the fire,
Bob G.

Pstraw · 02-12-2021, 11:12 PM

That thing is sharp D Mo

Dale Moser · 02-13-2021, 03:04 PM

Quote:

Originally Posted by Bob G

Where do you get those?

tending the fire,
Bob G.

Amazon.

Sent from my iPhone using Tapatalk

Double L · 02-13-2021, 09:14 PM

Your threads never disappoint Dale! Dang sure good weather to test it!!!

Dale Moser · 02-26-2021, 08:36 PM

Thanks, Larry! I hope you and yours are doing well, sir.

Sent from my iPhone using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-23-2021, 07:18 AM	#51
Philip-TX Ten Point Join Date: Oct 2006	Dale what is the red thing on the tripod base, in the back? Blower of some sort?

01-23-2021, 07:58 AM	#52
Pstraw Ten Point Join Date: Sep 2017 Location: Henderson Hunt In: Front yard or back yard	Nothin to it. Now to get on with the project.

01-23-2021, 09:08 AM	#53
Rotag Ten Point Join Date: Oct 2006 Location: New Braunfels Hunt In: Texas	Just send it Sent from my iPhone using Tapatalk Pro

01-23-2021, 12:40 PM	#55
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	I got some more done last night, but it won’t let me post a picture right now. Sent from my iPhone using Tapatalk

01-23-2021, 01:25 PM	#56
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Sent from my iPhone using Tapatalk

01-23-2021, 09:56 PM	#57
Mike D Pope & Young Join Date: Oct 2006 Location: North Texas Hunt In: Haskell County, TX	Where ya planning on puttin this Dale? We had one at the lease when I lived in Mississippi. We used to stuff it full of pine logs and it would get red hot. Couldn’t get closer than 5’ to it the heat was so intense. Sent from my iPhone using Tapatalk Pro

01-23-2021, 10:03 PM	#58
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Gonna put it under the party porch at camp for when it’s raining, or too windy for a camp fire. 5’ of radiant heat would exceed expectations, I just hope it makes it tolerable under there and doesn’t smoke to much. Sent from my iPhone using Tapatalk

01-23-2021, 11:27 PM	#59
bboswell Pope & Young Join Date: Oct 2006 Location: Montgomery County Hunt In: Where ever I can	In for another Moser build!

01-27-2021, 11:45 PM	#60
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Gettin...somewhere.. Sent from my iPhone using Tapatalk

01-27-2021, 11:47 PM	#61
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Built the door, but havnt bought the hinges, and I don’t feel like making them. Sent from my iPhone using Tapatalk

01-28-2021, 05:15 PM	#62
RR 314 Pope & Young Join Date: Nov 2006	Man, you weld pretty dang well for a brick guy. Haaaa. Seriously, looks great.

02-03-2021, 08:25 AM	#63
Agdog Ten Point Join Date: Oct 2006 Location: Prosper, TX Hunt In: Atoka County, OK	Bender get finished up yet Dale?

02-03-2021, 10:17 AM	#66
TexasBob Pope & Young Join Date: Feb 2009 Location: NW Houston Area	Missed this before. We need something similar for deer camp next year. Not sure exactly what yet but this inspires me

02-04-2021, 11:18 PM	#68
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Hinges showed up, and they’re a little bigger/more awkward than I hoped, but nothin on this was ever meant to pretty. Sent from my iPhone using Tapatalk

02-04-2021, 11:20 PM	#69
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Got the air shutter finished and put in. Sent from my iPhone using Tapatalk

02-04-2021, 11:22 PM	#71
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	As we set. Sent from my iPhone using Tapatalk

02-04-2021, 11:28 PM	#72
Artos Pope & Young Join Date: Nov 2007 Location: Deep South TX Hunt In: Deep South TX

02-05-2021, 08:03 AM	#73
DoveBlaster Ten Point Join Date: Jul 2012 Location: Fort Worth Hunt In: Stephens County, Anywhere	Hell yeah, looks awesome.

02-05-2021, 08:48 AM	#75
bboswell Pope & Young Join Date: Oct 2006 Location: Montgomery County Hunt In: Where ever I can	Strong

02-05-2021, 09:36 AM	#76
bobc Ten Point Join Date: Jan 2012 Location: Temple Hunt In: Bell County, New Mexico	Excellent work as expected. Looking good.

02-05-2021, 10:13 AM	#77
Hardware Ten Point Join Date: Oct 2010 Location: Brazoria County Hunt In: Texas, Western US & Argentina	When is the test run???

02-05-2021, 10:15 AM	#78
hog_down Ten Point Join Date: Mar 2017 Location: Houston, TX	very nice! did you make or buy your hinges?

02-05-2021, 11:48 AM	#79
Ouch Pope & Young Join Date: Oct 2007 Location: Noonday Hunt In: a camo banana hammock.	Son. Of. A. *****.

02-05-2021, 12:49 PM	#81
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Sent from my iPhone using Tapatalk

02-05-2021, 12:50 PM	#82
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	I bought the hinges. Sent from my iPhone using Tapatalk

02-06-2021, 09:58 PM	#84
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Got paint on, just need fire now. I hope it works! Sent from my iPhone using Tapatalk

02-06-2021, 10:05 PM	#85
bboswell Pope & Young Join Date: Oct 2006 Location: Montgomery County Hunt In: Where ever I can	It works, I can tell from here

02-07-2021, 06:48 PM	#86
Texas Grown Pope & Young Join Date: Oct 2006 Location: Burleson, Texas Hunt In: Kick CoViD's tail!	Thats a dang nice heater Dale!

02-07-2021, 07:16 PM	#87
3ChordTruth Ten Point Join Date: May 2020 Location: Grapevine	Bender turned out lookin’ good, bring on the cold and fire it up.

02-12-2021, 06:54 PM	#89
Dale Moser Pope & Young Join Date: Oct 2006 Location: Wise Cty Hunt In: Young Cty	Sent from my iPhone using Tapatalk