Paper tune help?

[cwd500]

Having problems paper tuning my pse dna. Bow is set at 68# 28" dl, Arrow is easton axis 300 cut 27" with 75gr inserts and 125gr fp. Getting bad left tare. First pic first shot on left, then I moved the rest to the right a little, second shot on the right of the first picture then I moved rest to the right again and made the third shot that is the second picture. At that point I realized that the rest is touching the side of the shelf. Then I tried a bare shaft and the tare was just worse. Any help?

Sent from my moto g(7) using Tapatalk

[HighwayHunter]

Yoke tune or shim cams. Twist left yoke or move cam to the left.


Sent from my iPhone using Tapatalk

[muddyfuzzy]

Try setting it back to where you started and go the other direction.


Sent from my iPhone using Tapatalk

[Box-R]

Move closer or farther back from the paper and see if the tear is changed.

[Fishndude]

Yoke tune or shim cams. Twist left yoke or move cam to the left.


Sent from my iPhone using Tapatalk

Bam. Easy fix