Bow / gun blind build

[MasonCo.]

I had a couple pallets laying around so I decided to join them together, top with 3/4 plywood then go from there.



I joined the two pallets together using two 2x4’s and slid through both then anchored the pallets to the 2x4’s, then anchored the plywood to the pallets and joining 2x4’s.


Sent from my iPhone using Tapatalk

[MasonCo.]

Sent from my iPhone using Tapatalk

[texan4ut]

That will work.

[MasonCo.]

Sent from my iPhone using Tapatalk

[FireNguns]

Looks a bit narrow to draw a bow and shoot out of the long side windows. How wide is it inside?

[MasonCo.]

Looks a bit narrow to draw a bow and shoot out of the long side windows. How wide is it inside?

It’s tight, but will work. Will mainly be a rifle blind for the family but made the windows big enough for a possible bow shot.


Sent from my iPhone using Tapatalk

[MasonCo.]

Sent from my iPhone using Tapatalk

[Travis Deveney]

looks good

[hunterburch42]

I have always wanted to use fence pickets


Sent from my iPhone using Tapatalk

[bmac]

Just a fair warning that if the pockets are wet you might have to tighten them up when it dries and doesn’t look like you are sitting behind a slotted fence.


Sent from my iPhone using Tapatalk

[MasonCo.]

Just a fair warning that if the pockets are wet you might have to tighten them up when it dries and doesn’t look like you are sitting behind a slotted fence.


Sent from my iPhone using Tapatalk

Yea , I’m going to cover each gap with strips of pickets, or put something inside against the pickets.


Sent from my iPhone using Tapatalk

[bmac]

I dare you to flex seal it


Sent from my iPhone using Tapatalk

[AgBass01]

I dare you to flex seal it


Sent from my iPhone using Tapatalk

That's a heck of an idea actually. Lol

Sent from my Pixel 4 XL using Tapatalk

[MasonCo.]

Sent from my iPhone using Tapatalk

[MasonCo.]

Sent from my iPhone using Tapatalk