Has anyone used a 5” panel for a corral trap and wished they went with the 60” panels instead?
-
-
Assuming you mean a 5' (foot) panel then that would be exactly 60" tall. I'm confused.
I've built a circle C trap with 52" combo panels. It works. -
Sorry, I meant 50” or 4’.Comment
-
I’m currently building my trap with 50” panels and I’m having second thoughts about bumping up to the 60” panels but, I’m not sure it’s worth going from $22 a panel vs $52 a panel.Comment
-
I have seen them climb out of both depending on how sturdy the trap is. Go tall and either fence the inside top and/or leave the top of each panel untied so it is unstable when they start to climb out and check traps early in the morning.Comment
-
I used to build traps and used them quite a bit myself also, I have not seen a hog get over a 5' panel although anything is possible. You can use a 4' BUT...only if you fashion a rail of some type inside about 6" wide or better. I have done that to existing traps by running wire back and forth in a way that creates a pretty good screen they can't navigate.Comment
Comment