I'm a lefty and want an ambi-safety for it. Is the install hard? I already have an after-market trigger in it.
Announcement
Collapse
No announcement yet.
Ambidextrous Safety for Ruger AR
Collapse
X
-
Pull the grip off and remove the spring and detent for the safety.
Remove the trigger if needed by pushing both pins out.
Remove one safety lever and slide it in. Verify the orientation is correct so the detent hits where it’s needed. And install the lever back.
Put the trigger back in.
Install spring, detent, and grip. Tighten.
Done.
Comment
-
Originally posted by trophy8 View PostPull the grip off and remove the spring and detent for the safety.
Remove the trigger if needed by pushing both pins out.
Remove one safety lever and slide it in. Verify the orientation is correct so the detent hits where it’s needed. And install the lever back.
Put the trigger back in.
Install spring, detent, and grip. Tighten.
Done.
Thx trophy8--just gonna verify which safety works (or won't work) with my after-market trigger, then I'll go for it But, first I'm going out tonight to do a hog---need pork for venison salami.
Comment
Comment