Take a small prybar and get between it and rear end and pry out on it. Go from one side to the other then rotate it. If it’s never been out, it may take a lil bit. When installing new one put a lil grease or never seize on it.
Take a small prybar and get between it and rear end and pry out on it. Go from one side to the other then rotate it. If it’s never been out, it may take a lil bit. When installing new one put a lil grease or never seize on it.
If the above doesn’t work. There is a vise grip with a with a weighted sledge set up that will come out very easy. I have a screen shot but can’t get it to upload. Should be able to get it out in seconds with it without messing up the housing.
Comment