I am trying to tune my bow, bare shaft tune, and the problem I am getting is that the bare shaft arrow is nock high in the target compared to my fletched arrow. It doesn't seem to matter where I put the nock. My setup is Bear patriot 60' 28" dl arrows 2016 at 29" with 125gr tips. It is the same with either ff or dacron string.
Announcement
Collapse
No announcement yet.
Help with tuning
Collapse
X
-
BARE SHAFTS GROUPING HIGH
Reason: Nock point too low
Remedy: Raise nock point
BARE SHAFTS GROUPING LOW
Reason: Nock point too high
Remedy: Lower nock point
BARE SHAFTS GROUPING LEFT
Reason: Over spined (stiff)
Remedy: Heavier point, or thinner side plate, or longer shaft, or switching from a Dacron string to a DF-97 or Fast Flight, or new, weaker arrows.
BARE SHAFTS GROUPING RIGHT
Reason: Under spined (weak)
Remedy: Lighter point. or thicker side plate, or shorter shaft, or switch from a DF-97 or FF string to Dacron, or new, stiffer arrows.
^
Copied that from O.L. Adcock's tuning page.
Comment
Comment