need a math genius

[mjhaverkamp]

How many 30 inch diameter circles can I get from a 4ft x 8ft sheet of plywood ?

[Ruger92]

I'm not a genius, but I think the answer is 3

[Rubi513]

I'm not a genius, but I think the answer is 3

same

[jordan]

3

[Humper]

https://www.engineeringtoolbox.com/circles-within-rectangle-d_1905.html

Looks like three

[Chad_E]

3

Drew this up in AutoCAD real quick.

[Tx.Fisher]

Finally a question suited towards me. Im gonna say 3?

[RR 314]

3.824.

[BigCountry101]

Not exact math, but I don't think there is going to be a way to get more than 3?

The plywood is 96 inches across. Given the diameter of 30, you will only get three in a row across. Then with it only 48 inches tall there isn't much room for a lower row either. I tried to draw it out and see if there was a way to stagger them to get more than a single row (e.g. 2 on top row, 2 more below, etc.) but doesn't look like it.

[HogHunter34]

3

Drew this up in AutoCAD real quick.
[ATTACH]1099191[/ATTACH]

Cheater

[Horsefly]

Three with some leftover

[12ring]

Shade over 29"

Cut it down to 29" and get 4.

[Antlers86]

You can get 4 if you cut 2 half circles and join them together. Lol

[Dr. Evil]

3 on one side, 3 on the other

[RobinHood]

1, 2, or 3
Take your pick


Sent from my iPhone using Tapatalk