How about a trade thread for reloading components.

[turkeyhunter1]

[QUOTE=bmc09;16192114]In search of .284 Barnes 120 grain TTSX

I think i have some.

I'll check when I get home.

[tdwinklr]

I have primers in Shotgun and Large Pistol. Looking to trade for Large Rifle and/or Small Pistol primers.
Please PM since I don't look at this thread often enough.

[BLACKFINTURKEY]

Any 300gr or larger 44 cal projectiles out there? Prefer a Keith style bullet.

[stxhunter]

If anybody is looking for .243 107 SMK I’d like to trade 500 for Hornady 108 ELDM, Berger 105/109 or $

[hrdwrkncwby76]

Originally Posted by stxhunter

If anybody is looking for .243 107 SMK I’d like to trade 500 for Hornady 108 ELDM, Berger 105/109 or $

Pm sent


Sent from my iPhone using Tapatalk Pro

[Buckwheat]

Originally Posted by BLACKFINTURKEY

Any 300gr or larger 44 cal projectiles out there? Prefer a Keith style bullet.

Midway had some WFN hard cast GAS CHECK bullets yesterday. Also had 260 grain


Sent from my iPhone using Tapatalk

[muddyfuzzy]

Originally Posted by BLACKFINTURKEY

Any 300gr or larger 44 cal projectiles out there? Prefer a Keith style bullet.

I have some Nosler partitions and Hornady XTP’s should be a full box each.

[BLACKFINTURKEY]

Originally Posted by muddyfuzzy

I have some Nosler partitions and Hornady XTP’s should be a full box each.

What are you asking for them?

[Blood Trail]

Originally Posted by BLACKFINTURKEY

Any 300gr or larger 44 cal projectiles out there? Prefer a Keith style bullet.

Didn’t know they make 300 gr Keith’s. Most molds are 260 grs. I cast them for my .44 mag.


Sent from my iPhone using Tapatalk

[talleywack97]

Nib two boxes Nosler custom competition 77 grn pills wtt for Hornady v-max 55 with or without cannelure. Straight up trade is good in my book

[El Paisano]

I have:
243 brass: 20 Federal 2X, FL resized; 18 Norma 2X, FL resized, 2 Norma 1X and primed; 7 Federal 1X, FL resized and primed.
30-30 brass: 56 1X Remington brass.

Dies: Lee RGB 243 dies set (used to load 39 rounds)

Lee Case length gauge and shell holder for 243.

243 Bullets: 161 (1 unopened box and 61 in opened box) Hornady Interlock 100 gr BTSP.
30 cal (.308) bullets: 1 unopened box (100) of Hornady 150 gr SST.

Fed 210 LRP (300)
I also have factory 243 Norma ammunition and 30-30 ammunition of various kinds.

I need:
CCI or Federal small rifle primers (300 or so)
Dies for 300 Blackout
Lee case length gauge and shell holder for 300 BO
Hornady 30 cal 110 gr CX bullets
Hornady 30 cal 190 gr Sub-x bullets.
H110 or CFE Blk powder.

PM me if interested. I can't stay watching this thread.

[mkk]

Looking for some AR-Comp.
Have several different powders I could trade for or cash
Thanks
Mike


Sent from my iPhone using Tapatalk

[stxhunter]

Originally Posted by stxhunter

If anybody is looking for .243 107 SMK I’d like to trade 500 for Hornady 108 ELDM, Berger 105/109 or $

Sold

[highspeed]

WTT 1 lb. H335 for IMR 4064, H4895, Varget, or CFE223

[SwampBuck]

Have some about 3 lbs or so of RL22, few pounds of IMR 4831, and a little RL 19 I’ll be offloading soon if anyones interested.

[mkk]

Originally Posted by highspeed

WTT 1 lb. H335 for IMR 4064, H4895, Varget, or CFE223

Would IMR4895 help?


Sent from my iPhone using Tapatalk

[highspeed]

Originally Posted by mkk

Would IMR4895 help?


Sent from my iPhone using Tapatalk

To be honest, I’ve never messed with either H4895 or IMR4895. All of my reloading manuals call for the Hodgdon for my 250 Savage

[Chase4556]

Originally Posted by highspeed

To be honest, I’ve never messed with either H4895 or IMR4895. All of my reloading manuals call for the Hodgdon for my 250 Savage

https://www.hodgdonreloading.com/

Has data for both powders for the .250-3000 savage. Same cartridge? Might help you out. Seems they are close to each other judging by the load data they show.

[mkk]

Originally Posted by highspeed

To be honest, I’ve never messed with either H4895 or IMR4895. All of my reloading manuals call for the Hodgdon for my 250 Savage

I’ve got a pound of it if you want to try it out


Sent from my iPhone using Tapatalk

[mkk]

Originally Posted by highspeed

To be honest, I’ve never messed with either H4895 or IMR4895. All of my reloading manuals call for the Hodgdon for my 250 Savage

What bullet and barrel length are you using? I’ll run a QL on it with I4895


Sent from my iPhone using Tapatalk

[caa4612]

Looking for Federal 215M or 215 primers. I'm not looking for a lot, 100 or 200 pcs. Have (200 pcs.) Federal 210's I could trade. I am willing to pay for the ones I need if no interest in a trade.

[QuackHunter]

Opened hi skor 800x 9.6oz $15 shipped



Sent from my iPhone using Tapatalk

[QuackHunter]

Ransom rest precision pistol rest with 9 block sets $750 shipped.




Sent from my iPhone using Tapatalk

[westtexducks]

Looking for 100 pieces of .257 weatherby brass. Any one got some they would part with?

Sent from my E6910 using Tapatalk

[BarW]

Midway has 140 grain 6.5 accubonds in stock for all yall looking.

Sent from my SM-G960U using Tapatalk

[mkk]

Looking for some 110gr .277 projectiles


Sent from my iPhone using Tapatalk

[texasforever]

Originally Posted by mkk

Looking for some 110gr .277 projectiles


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

[McClain]

While this thread is excellent for facilitating the trade or buying of reloading components from individuals, I would very much like to see a dedicated thread for information of where powder and primers are spotted in stock at commercial locations, either online or at local retail stores. I am not sure if this would violate any TBH policies, but it would simply make it much more effective at locating places where powder or primers become available, even if for short periods of time. One can only spend so much time surfing the net or spend so much gas stopping in a various retail outlets looking for these unicorns. You would likely have to act fast once an instock item has been reported, but a dedicated thread just for powder and primers would help a lot of desperate TBHers. What says the green screen (especially moderators)?

[db@100]

Originally Posted by McClain

While this thread is excellent for facilitating the trade or buying of reloading components from individuals, I would very much like to see a dedicated thread for information of where powder and primers are spotted in stock at commercial locations, either online or at local retail stores. I am not sure if this would violate any TBH policies, but it would simply make it much more effective at locating places where powder or primers become available, even if for short periods of time. One can only spend so much time surfing the net or spend so much gas stopping in a various retail outlets looking for these unicorns. You would likely have to act fast once an instock item has been reported, but a dedicated thread just for powder and primers would help a lot of desperate TBHers. What says the green screen (especially moderators)?

I thought this is what this thread did now, informing people what and where items are available?

[Bucknaked]

Originally Posted by db@100

I thought this is what this thread did now, informing people what and where items are available?

It’s all inclusive !

[texasforever]

Originally Posted by McClain

While this thread is excellent for facilitating the trade or buying of reloading components from individuals, I would very much like to see a dedicated thread for information of where powder and primers are spotted in stock at commercial locations, either online or at local retail stores. I am not sure if this would violate any TBH policies, but it would simply make it much more effective at locating places where powder or primers become available, even if for short periods of time. One can only spend so much time surfing the net or spend so much gas stopping in a various retail outlets looking for these unicorns. You would likely have to act fast once an instock item has been reported, but a dedicated thread just for powder and primers would help a lot of desperate TBHers. What says the green screen (especially moderators)?

You use Discord or have a phone capable of using it? If so join https://discord.gg/reloading at turn on instock notifications. About the fastest way to get in on stuff without looking all day


Sent from my iPhone using Tapatalk

[texasforever]

Also while I’m here, have a sealed 8lb of Varget, looking to trade for 8lber of H4350. Located in Wharton


Sent from my iPhone using Tapatalk

[McClain]

Originally Posted by texasforever

You use Discord or have a phone capable of using it? If so join https://discord.gg/reloading at turn on instock notifications. About the fastest way to get in on stuff without looking all day


Sent from my iPhone using Tapatalk

Thanks for the info, I’ll look into it. Interested in selling that jug of Varget? I have no H4350, am looking for that one too.

[McClain]

Originally Posted by Bucknaked

It’s all inclusive !

Just don’t see many “in stock announcements” in this thread, even though I have probably passed some gun shops that had what I was needing in traveling across country.

[texasforever]

Originally Posted by McClain

Thanks for the info, I’ll look into it. Interested in selling that jug of Varget? I have no H4350, am looking for that one too.

I’ll sell it for what I paid. Believe it was $327 to my door last week


Sent from my iPhone using Tapatalk

[McClain]

Originally Posted by texasforever

I’ll sell it for what I paid. Believe it was $327 to my door last week


Sent from my iPhone using Tapatalk

Thanks! Just wish you were close enough to make this work. Good luck with the trade/sale!

[caa4612]

I have some Barnes TTSX 130 gr. 270 bullets. I need 7mm 120 gr. TTSX. I'd like to trade for the 7mm if anyone has some they'd part with and need 270 bullets. It's a box of 50, and has not been opened.

[Wild-billwjs]

Anyone have any 7saum brass they sell?
Thanks Jason

[McClain]

I'm looking to trade for up to 3 new unopened bottles of Hodgdon Benchmark powder in east Tx. I have one new bottle of H4350 and two new bottles of Varget to trade. Trade only, will not sale.

[highspeed]

Originally Posted by highspeed

WTT 1 lb. H335 for IMR 4064, H4895, Varget, or CFE223

Also looking for IMR 3031

[BRust]

Originally Posted by QuackHunter

Opened hi skor 800x 9.6oz $15 shipped



Sent from my iPhone using Tapatalk

Is this still available?

[BLACKFINTURKEY]

Any 300 win mag brass out there? Need around 50 pieces probably.

[Matt_C]

https://www.bluecollarreloading.com/...c9490112&_ss=r

[kmitchl]

Looking to trade large pistol/small pistol primers for 7-1/2-9 lead shot or 209 shotgun primers. Also looking for 1# of 700X powder.

[tdwinklr]

Originally Posted by highspeed

Also looking for IMR 3031

same here but seems its like pulling teeth.

[tdwinklr]

I need .30 cal. bullets, preferably for a .30-06 and for hunting purposes.
I am totally out!

thank you.

[BLACKFINTURKEY]

Originally Posted by tdwinklr

I need .30 cal. bullets, preferably for a .30-06 and for hunting purposes.
I am totally out!

thank you.

What are you looking for exactly? Any trade bait?

[Brazos Hunter]

Originally Posted by SwampBuck

Have some about 3 lbs or so of RL22, few pounds of IMR 4831, and a little RL 19 I’ll be offloading soon if anyones interested.

If you still have any or all of it shoot me a PM if you would?



Micheal

[Brazos Hunter]

Originally Posted by texasforever

Also while I’m here, have a sealed 8lb of Varget, looking to trade for 8lber of H4350. Located in Wharton


Sent from my iPhone using Tapatalk

I have a few lbs if you are interested?


Micheal

[Kong]

Originally Posted by tdwinklr

same here but seems its like pulling teeth.

https://www.powdervalleyinc.com/product/imr-3031/