I’ve got a nightforce with a 56mm objective and a rifle with a full sendero contour proof barrel. What ring height would be needed? Thinking highs but am unsure. TIA
-
-
Pic rail on the action or what?
Steel sendero contour barrel or proof carbon? They are different.
Assuming carbon. And a pic rail. Lows of most brands still fit. Assuming 34mm tube.Last edited by trophy8; 10-18-2021, 11:35 AM. -
Probably a high, 56mm =2.04 inches
I have a Burris signature 44mm on red field one piece base , Winchester mod 70 medium contour barrel and 44mm was a tight fit with medium ringsLast edited by S-3 Ranch; 10-18-2021, 12:01 PM.Comment
-
Big difference in your bases and a rail. I’m running 34mm and 35mm tubes and 56mm objectives on several guns with lows.Originally posted by S-3 Ranch View PostComment
-
-
Like Matt said, assuming you have a 34mm tube and are running a pic rail, most lows should work fine for you.Last edited by Raider4044; 10-18-2021, 12:28 PM.Comment
-
Right. Being as it’s 2021 I’d hope he’s running a railOriginally posted by S-3 Ranch View Post
Comment
-
Sorry left out a bit of info, it’s the carbon barrel, on a 20moa rail and I believe it’s a 30mm tube. Will double check but I thought the NXS was a 30mm tubeOriginally posted by trophy8 View PostComment
-
Lows or medium, your preference. Both will work.Comment
-
If it's an NXS, it's going to be a 30mm. I was thinking a 5-25x56 or 7-35x56 ATACR. I would probably go with medium height rings in that case.Originally posted by Mac View PostLast edited by Raider4044; 10-18-2021, 01:28 PM.Comment
-
Lows might clear still. Mediums Will for sure. There’s some slight variations in heights from different manufacturers. Pay attention to that.
And you haven’t posted the rifle pics. So you have let us down.
Comment
-
Thx fellasComment
-
-
Lows might clear mediums for sure will…Comment
Comment