Announcement

Collapse
No announcement yet.

JC Optimus Shelf Mod For Vanes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    JC Optimus Shelf Mod For Vanes

    This is my best shelf mod to date.

    Not real pretty, but it works fantastic.

    Complete fletching clearance.









    Rick

    #2
    The shelf is made with two felt furniture pads stuck together, then I used a dremel with a sanding wheel to trim it to the shape I wanted.

    Rick

    Comment


      #3
      Nice work Rick, that shelf mod turned out looking good.

      Comment


        #4
        Originally posted by 3ChordTruth View Post
        Nice work Rick, that shelf mod turned out looking good.
        Thanks.

        I don't want to do any more trimming on it, until I know exactly how much I need to have.

        Once I get my final tune nailed down (probably after I get my new limbs), I'll trim it a bit more (if I have any excessive width), then purdy it up & make it match with some velcro.

        Rick

        Comment


          #5
          What I plan to do is, once this is completely finished the way it needs to be, and how I want it, I am going to copy it in a hard material. I've molded JB Weld with great success in the past, and that is probably what I will use for the hard material.

          The one difference with the hard material will be, that it will not have the hump on top. It will instead have a square slot, that I will cut a piece of the felt to drop into that slot, and secure it to create the hump.

          Rick

          Comment

          Working...
          X