Worked on my feeder last night. I went with the same 6 inch air duct cap as louieagarcia and then capped it with a cover from the sprinkler section. Screwed the cover to the cap and then installed it on the feeder. I'm going to shoot some foam in the cap hole to keep the wasps out. Turned out good and now there are wires for the coons to hang on.
Announcement
Collapse
No announcement yet.
Asf ez-feeder
Collapse
X
-
Originally posted by JeffK View PostAnyone mind measuring how far it throws out. Does any pile up right at the feeder?
The sheet metal on this is alot thinner also
Comment
-
Originally posted by gingib View PostThat is my concern. With a LAMCO, they can at least fit under to eat. The only thing would will eat under this feeder is maybe a pig..
The sheet metal on this is alot thinner also
Comment
-
Originally posted by COONHOOD View PostI like the idea of the small gap between the plate and the spinner so coons can’t reach In, however what is the spread like on these types? Can’t be very large with no room to be tossed without being knocked down by the bottom of the feeder? Do any of you guys see this as a draw back?
Comment
Comment