Want to replace stock - TexasBowhunter.com Community Discussion Forums

Hoytbowhunter · 01-10-2021, 12:31 PM

I have the B-14 HMR in 6.5 Creedmoor, and wanting to replace the stock. Just wandering if this would work as a replacement. Thanks for the help.

Sent from my iPad using Tapatalk

Hoytbowhunter · 01-10-2021, 02:56 PM

Ttt

Hoytbowhunter · 01-10-2021, 05:59 PM

Bump anyone

Mac · 01-10-2021, 06:13 PM

It should fit but may require minor inlet work. I believe the bergara dbm is proprietary and not an exact fit in the standard m5 inlet. I know my bergara 22 action fit perfectly in a manners w/ a 700sa inlet, however I used a pt&g bottom metal. Hope that helps

Hoytbowhunter · 01-10-2021, 07:23 PM

Thank you Sir,

Greenheadless · 01-10-2021, 07:47 PM

Call them and ask?

futureagg · 01-10-2021, 08:03 PM

Owning an HMR. That stock will work, you will probably need to file down the side for the bolt release on the side of the action, you will also need a new bottom metal as the bergara is proprietary.

Sent from my iPhone using Tapatalk

Hoytbowhunter · 01-10-2021, 10:00 PM

Quote:

Originally Posted by Greenheadless

Call them and ask?

Will do.

Hoytbowhunter · 01-10-2021, 10:01 PM

Quote:

Originally Posted by futureagg

Owning an HMR. That stock will work, you will probably need to file down the side for the bolt release on the side of the action, you will also need a new bottom metal as the bergara is proprietary.

Sent from my iPhone using Tapatalk

Thank you Sir

Hoytbowhunter · 01-12-2021, 06:42 AM

Thanks y’all, I have an email out to Bergara.

Hoytbowhunter · 01-13-2021, 02:37 PM

Well contacted Bill and Carlson, They do not make a replacement stock the B-14 HMR barrel, So I contacted Bergara. They said to go through Greyboe the stock manufacture. We will see what happens now.

futureagg · 01-13-2021, 04:27 PM

Quote:

Originally Posted by Hoytbowhunter

Well contacted Bill and Carlson, They do not make a replacement stock the B-14 HMR barrel, So I contacted Bergara. They said to go through Greyboe the stock manufacture. We will see what happens now.

Ah didn’t even think about barrel channel being an issue.

I’m running a Grayboe ridgeback on my bergara. They are solid stocks. I think I have 3 of their stocks now.

Sent from my iPhone using Tapatalk

Hoytbowhunter · 01-13-2021, 07:06 PM

Yes Sir,
Spoke with them today, kinda Pricey! But really nice.
This is what they recommend the terrain I like it.

Sent from my iPad using Tapatalk

Muddy Bud · 01-13-2021, 07:17 PM

That’s a very nice looking stock.

Hoytbowhunter · 01-13-2021, 07:20 PM

I Thought so also, Here is the link to their site.
https://www.grayboe.com/collections/...oducts/terrain

futureagg · 01-13-2021, 09:21 PM

Check out red hawk rifles as well. They usually come with free bottom metal when you purchase the stock.

Sent from my iPhone using Tapatalk

cwd500 · 01-13-2021, 09:37 PM

I had a grayboe renegade on my 700 and when I bought my bergara hmr it dropped right into the grayboe stock. I agree with checking out redhawk rifles. I got my stock with free bottom metal there.

Sent from my Pixel 5 using Tapatalk

Hoytbowhunter · 01-14-2021, 06:20 AM

Will do, thanks.

Hoytbowhunter · 01-14-2021, 02:04 PM

Quote:

Originally Posted by futureagg

Check out red hawk rifles as well. They usually come with free bottom metal when you purchase the stock.

Sent from my iPhone using Tapatalk

They definitely have a better price, on the same stock thanks for the help.

CWKATTNER · 01-14-2021, 04:34 PM

I have a Bergara Ridge stock (similar to what you are looking at) I took off my 6.5CM and replaced it with a HMR stock. I'd sell it if you are interested. It will include the bottom metal.
Name: b14 ridge.png
Views: 71
Size: 62.3 KB

Name: b14 ridge.png
Views: 71
Size: 62.3 KB

Hoytbowhunter · 01-14-2021, 05:13 PM

Dang it, I would’ve traded you my stock for that.

scott.str · 01-14-2021, 05:28 PM

How much you selling take off stock for? Is it the pistol grip one? Have a Remington 700 I want to put it on

01-10-2021, 12:31 PM	#1
Hoytbowhunter Pope & Young Join Date: Dec 2012	Want to replace stock I have the B-14 HMR in 6.5 Creedmoor, and wanting to replace the stock. Just wandering if this would work as a replacement. Thanks for the help. Sent from my iPad using Tapatalk

01-14-2021, 04:34 PM	#20
CWKATTNER Ten Point Join Date: Jun 2012 Location: Christoval, Tx	I have a Bergara Ridge stock (similar to what you are looking at) I took off my 6.5CM and replaced it with a HMR stock. I'd sell it if you are interested. It will include the bottom metal. Attached Images Last edited by CWKATTNER; 01-14-2021 at 04:43 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-10-2021, 02:56 PM	#2
Hoytbowhunter Pope & Young Join Date: Dec 2012	Ttt

01-10-2021, 05:59 PM	#3
Hoytbowhunter Pope & Young Join Date: Dec 2012	Bump anyone

01-10-2021, 06:13 PM	#4
Mac Ten Point Join Date: Jun 2007 Location: San Antonio Hunt In: Edwards, Kendall	It should fit but may require minor inlet work. I believe the bergara dbm is proprietary and not an exact fit in the standard m5 inlet. I know my bergara 22 action fit perfectly in a manners w/ a 700sa inlet, however I used a pt&g bottom metal. Hope that helps

01-10-2021, 07:23 PM	#5
Hoytbowhunter Pope & Young Join Date: Dec 2012	Thank you Sir,

01-10-2021, 07:47 PM	#6
Greenheadless Ten Point Join Date: Dec 2006 Location: Houston, TX Hunt In: Liberty County	Call them and ask?

01-10-2021, 08:03 PM	#7
futureagg Ten Point Join Date: Dec 2010 Location: Katy Hunt In: Crockett	Owning an HMR. That stock will work, you will probably need to file down the side for the bolt release on the side of the action, you will also need a new bottom metal as the bergara is proprietary. Sent from my iPhone using Tapatalk

01-12-2021, 06:42 AM	#10
Hoytbowhunter Pope & Young Join Date: Dec 2012	Thanks y’all, I have an email out to Bergara.

01-13-2021, 02:37 PM	#11
Hoytbowhunter Pope & Young Join Date: Dec 2012	Well contacted Bill and Carlson, They do not make a replacement stock the B-14 HMR barrel, So I contacted Bergara. They said to go through Greyboe the stock manufacture. We will see what happens now.

01-13-2021, 07:06 PM	#13
Hoytbowhunter Pope & Young Join Date: Dec 2012	Yes Sir, Spoke with them today, kinda Pricey! But really nice. This is what they recommend the terrain I like it. Sent from my iPad using Tapatalk

01-13-2021, 07:17 PM	#14
Muddy Bud Pope & Young Join Date: Jul 2009 Location: Corpus Christi Hunt In: Jim Hogg	That’s a very nice looking stock.

01-13-2021, 07:20 PM	#15
Hoytbowhunter Pope & Young Join Date: Dec 2012	I Thought so also, Here is the link to their site. https://www.grayboe.com/collections/...oducts/terrain

01-13-2021, 09:21 PM	#16
futureagg Ten Point Join Date: Dec 2010 Location: Katy Hunt In: Crockett	Check out red hawk rifles as well. They usually come with free bottom metal when you purchase the stock. Sent from my iPhone using Tapatalk

01-13-2021, 09:37 PM	#17
cwd500 Ten Point Join Date: Jul 2010 Location: Sour Lake, Tx Hunt In: Sour Lake, Tx Hardin Co.	I had a grayboe renegade on my 700 and when I bought my bergara hmr it dropped right into the grayboe stock. I agree with checking out redhawk rifles. I got my stock with free bottom metal there. Sent from my Pixel 5 using Tapatalk

01-14-2021, 06:20 AM	#18
Hoytbowhunter Pope & Young Join Date: Dec 2012	Will do, thanks.

01-14-2021, 05:13 PM	#21
Hoytbowhunter Pope & Young Join Date: Dec 2012	Dang it, I would’ve traded you my stock for that.

01-14-2021, 05:28 PM	#22
scott.str Ten Point Join Date: Feb 2013 Location: Flower mound tx Hunt In: Mitchell, County	How much you selling take off stock for? Is it the pistol grip one? Have a Remington 700 I want to put it on