Deer blind build

[jharp]

I’m in the process of building a 4x6 deer blind. I have built the same blind a number of times but can never remember what height to set the windows this is a rifle blind only. Also anyone recommend prefab windows to use?

[325to1195]

I think we did mine at 38 inches

[Dale Moser]

39”-41”


Sent from my iPhone using Tapatalk

[T-roy66]

I’m thinking mine are at 40 inches.

[cva34]

it depends on height of blind somewhat too...don't forget that part

[RobinHood]

My blind is 5’ off the ground and I put my windows at 39” from the floor and it’s perfect


Sent from my iPhone using Tapatalk

[9toes]

It is according to how tall you are the height of your chair. Set down in your chair with rifle in hand and have some one measure to your barrel from floor. Everyone is different, mine are 37".

[TB80]

Any plans or pics you can share? I’m in the process of planning out a deer blind build. What’s the estimated cost?


Sent from my iPhone using Tapatalk

[Throwin Darts]

Do a 6x6. It works out great for siding that comes in 4 foot sheets.

I put my windows at 39 inches


Sent from my iPhone using Tapatalk

[jharp]

I will post pics later today, I have the box done. I will frame up windows and door this evening. Basically I have a 4X6 treated base, with 3/4" decking. structure is 1/2" plywood and 2X2 framing. When it all ties in together its very strong. I use the elevator bracket and raise it up with 4x4 post. I'm going to use a silicone commercial roof coating for the roof, and seal all the edges.

Has anyone used " the original deer blind window co." windows? I'm looking at the framed swing sash.

[jharp]

In the process of cutting out and framing the windows



Sent from my iPhone using Tapatalk

[Dale Moser]

Use a router to cut out the window openings, perfect every time.


Sent from my iPhone using Tapatalk

[jharp]

Sent from my iPhone using Tapatalk

[jharp]

Sent from my iPhone using Tapatalk

[jharp]

Sent from my iPhone using Tapatalk