Thought I would share this recent project of mine, a poorboy fire pit. Was put together with relatively little effort and expense. Seems to work great. I started with an old tractor rim, welded a short piece of pipe to outside edge with a washer welded onto the bottom of the pipe and added a makeshift cap for the top to keep debris out of it when not in use. Then I took a cheap Chinese round cooking grate, built a frame for it with an ell coupling and pipe that would fit inside the stand pipe. It swivels 360 degrees and fits just above the top of the pit. I also put a short piece of 4" pipe under the rim on the bottom as an air vent, but not sure it's really needed.
Announcement
Collapse
No announcement yet.
Poorboy Fire Pit
Collapse
X
Comment