Another rainy day so it was a good day to do some work in the shop. I made a couple of loading blocks. I got tired of the cheap flimsy plastic ones. I bought some aluminum stock a while back that would work just perfect. A couple hours on the milling machine and here are the results. One each for magnums, standard, and .223 cases.
The next project was rigging a powered source for my Wilson case trimmer. I made an adapter on the lathe to use a drill. Then an idea came to me. I had an RCBS motorized trimmer that I really didn't care for. It just didn't have the accuracy that I wanted. So I decided to see if I could combine the two. So I pulled the RCBS trimmer part off and went about fitting the Wilson to the RCBS power portion. It worked great! Finally and accurate motorized trimmer.
The next project was rigging a powered source for my Wilson case trimmer. I made an adapter on the lathe to use a drill. Then an idea came to me. I had an RCBS motorized trimmer that I really didn't care for. It just didn't have the accuracy that I wanted. So I decided to see if I could combine the two. So I pulled the RCBS trimmer part off and went about fitting the Wilson to the RCBS power portion. It worked great! Finally and accurate motorized trimmer.
Comment