Nice work! I'm using those exact same Driver's as 4 fletch now to. After looking around at different vanes I thought those were the perfect size vane for 4 fletch. I have had a little problem with adhesion, but I haven't been using a wrap.
actually went with 1 degree left offset.... haven't tested but from everything i have read will lose less speed with offset when compared to a helical... both stabilize well.... shot out to 50 yards the other day and shooting groups the size of a credit card.... will shoot hopefully out to 100 this coming weekend weather permitting
Nice work! I'm using those exact same Driver's as 4 fletch now to. After looking around at different vanes I thought those were the perfect size vane for 4 fletch. I have had a little problem with adhesion, but I haven't been using a wrap.
Adhesion wasn’t an issue for this set that I did used the primer pen as well and probably let sit 60 seconds before messing with em.... how you like them flying seem to be a little quieter in flight too or could be placebo effect
Adhesion wasn’t an issue for this set that I did used the primer pen as well and probably let sit 60 seconds before messing with em.... how you like them flying seem to be a little quieter in flight too or could be placebo effect
Sent from my iPhone using Tapatalk
I really like the TAC vanes. They are durable, seem quieter, arrows fly good, etc. I have just had one every once in a while start to come off. Usually towards the middle of the vane. Seems like from everyone I talked to you if you use a wrap they never have a problem. I haven't wanted to use a wrap, really just because it's one more thing to mess with. I started lightly sanding the where I put the vanes and that seemed to have helped.
Comment