Anyone ever change wheel bearings on a Polaris Ranger

[Russ79]

I was driving my Ranger over to the lease yesterday and got almost there when I started hearing a screeching sound. Stopped and started several times and kept hearing the screeching sound. Got out and checked and couldn't touch the driver's side rear wheel rim because it was so hot. So I limped my way back home but it looks like my bearing is going out or already gone. Thought I would check Youtube but was wondering if anyone has ever done it or should I just go ahead and take it to the shop.

[ethic1]

If you have a press it isn’t bad. Make sure you put them in freezer 24 hours before you do it.

[Boone11]

If you have a press it isn’t bad. Make sure you put them in freezer 24 hours before you do it.

^^pretty easy with a press

[GOODEN]

A press makes it easier but I do mine without a press. I use an old 2” ball to knock em out with and use the old bearing to tap the new one in with. I’ve changed mine a few times. I’ve only got 4400 miles on mine though.