I’m getting ready to build a couple new stands. The stands will be 6’ x 6’. I would like them to be about 5’ off the ground to the bottom of stand. The stand frames will be welded square tubing. I would like the legs to be removable and be able to slide in something on the bottom of the stand in each corner. Example would be legs made of 2” square tubing and they would slide in a short piece of 2 1/4” square tubing or pipe that is welded in each corner of stand. What I don’t know is what size should I use for the legs and what size would be needed for the legs to slide into?
-
-
1 1/2” OD pipe for the legs, 1 1/2” ID for the sleeves is what I use.
Sent from my iPhone using Tapatalk -
So correct me if I’m wrong but I believe 1 1/2” pipe has a O.D. Of 1.9”.Originally posted by RobinHood View Post
2” schedule 40 has a I.D. Of 2.067”
Is that what your using?Comment
Comment