How about a trade thread for reloading components. - Page 2 - TexasBowhunter.com Community Discussion Forums

BigTex.308 · 04-27-2013, 02:59 PM

Quote:

Originally Posted by dclifton

Anybody have any good deals on 45 acp bullets? Idc if there cast or plated etc. just cheap

I usually pay around $45/500 at 10ring for friendswood cast bullets. But I found some at heavy metal bullets.com. ordered 1k and 1k 9mm. Paid like $137 with shipping. Took about 5 weeks but i got em in

Ike

bluelund79 · 04-28-2013, 09:44 AM

I have 52 pieces of 100gr Hornady Interlok sp 257cal. I'd like to swap them for either the same in 117gr or similar construction in 308 165gr.

Brazos Hunter · 04-28-2013, 09:52 AM

Wish I could help you Eric. The smallest I have is 175gr 30 cal. If you decide to sell your 257's, my partner at work is interested.

sierracharlie338 · 04-28-2013, 11:05 AM

Pm sent Eric.

bluelund79 · 04-28-2013, 01:28 PM

Sounds fair enough to me Michael. Ill let em sit here for a couple days. All your stuff is already in the trunk for Ike.

edit: SierraCharlie338, pm responded. Hornady's spoken for

redneck82 · 04-30-2013, 10:02 AM

My brother found (68) 85grn .243 bullets that we don't need. Would like to trade for small pistol primers, but I am open to other ideas.

El Viejo · 04-30-2013, 11:38 AM

I have 1,000 Remington #2 1/2 Large Pistol Primers that I would like to trade for an equal number of small pistol primers. I am in the RGV (Mission) & don't want to mail so would need express or FTF.

sierracharlie338 · 04-30-2013, 06:31 PM

Redneck82

What kind of bullets are they?

Brazos Hunter · 04-30-2013, 06:43 PM

Good to see you today Ike. Eric, I hope you enjoy your new toyz/gifts...

bluelund79 · 04-30-2013, 06:54 PM

redneck82, payment sent, thank you. Michael, yours is inbound in the next couple minutes. Thanks again brother, next time I'm in that area, i'll let you know in advance.

Eric

BigTex.308 · 04-30-2013, 07:06 PM

Quote:

Originally Posted by Brazos Hunter

Good to see you today Ike. Eric, I hope you enjoy your new toyz/gifts...

Same here. Thanks for meeting up with me

Ike

Brazos Hunter · 04-30-2013, 07:11 PM

Quote:

Originally Posted by BigTex.308

Same here. Thanks for meeting up with me

Ike

Ditto. Is it time to get off yet? It's already been crazy busy!

redneck82 · 04-30-2013, 07:31 PM

Quote:

Originally Posted by sierracharlie338

Redneck82

What kind of bullets are they?

Sold to Eric

BigTex.308 · 04-30-2013, 07:32 PM

Quote:

Originally Posted by Brazos Hunter

Ditto. Is it time to get off yet? It's already been crazy busy!

That's how we were 2 nights ago. You getting any of this rain?

Ike

257 · 05-01-2013, 11:59 AM

I have one 8# container of Win 760 (unopend) i would like to trade for the same in Win 748 or IMR4064

redneck82 · 05-01-2013, 01:55 PM

257- Are you looking for a even # for # trade? Where are you located?

Brazos Hunter · 05-01-2013, 10:49 PM

Quote:

Originally Posted by BigTex.308

That's how we were 2 nights ago. You getting any of this rain?

Ike

No rain, just busy. About time to get a quick bite...

PSD Ryan · 05-01-2013, 11:02 PM

Well I've got it in the classifieds, but I've got 215 pieces of 9mm brass I'd like to trade for .45 acp brass.

Buck-N-Rut · 05-01-2013, 11:10 PM

Anybody want to trade 9mm brass for 380 brass?

bustacap · 05-02-2013, 09:14 PM

I really need some A1680! I have 3+ lbs of magpro, 3lbs of h380, 1lb of varget, RL (10,19,25).... Remington 7 1/2 small rifle primers, federal gm215m lmr primers, cci250 lmr primers, barnes tsx 62gr bt 22cal, .308 110gr vmax, .308 110gr sierra hp, .308 125gr TNT's, .308 155gr amax, cash.....
Pm me if you have some to spare.

sierracharlie338 · 05-06-2013, 09:46 AM

Ttt

Jason19 · 05-06-2013, 09:50 AM

Quote:

Originally Posted by Buck-N-Rut

Anybody want to trade 9mm brass for 380 brass?

Pm me your address. I don't need 9mm brass but I have some 380 you can have. Not a lot but what I have is yours. No need for it.

Jason

bluelund79 · 05-06-2013, 09:51 AM

Quote:

Originally Posted by Jason19

Pm me your address. I don't need 9mm brass but I have some 380 you can have. Not a lot but what I have is yours. No need for it.

Jason

Awesome gesture Sir.

dclifton · 05-06-2013, 01:36 PM

I'm goin home this weekend and I know I have 9mm 40sw 380 AMS 38spl brass that I will trade for bullets for 45 or 45 acp brass

smb250 · 05-06-2013, 03:20 PM

R&M in El Campo just got some more powder in. Varget, H110, IMR 4350 just some of what they got

Skyjunky · 05-07-2013, 11:30 AM

I have:

1# Hogdon Clays
1# Accurate No. 7

Looking for Titegroup, Varget, bullets for 9mm or .40 S&W

oneforthewall · 05-13-2013, 11:20 AM

I have:

1# Hogdon International Clays-unopened, that I won't use and would like to trade for a lb of something I will.......watcha got?

Smitty · 05-13-2013, 01:18 PM

I have 2#'s of Hodgdon Super Performance and 1# of IMR4064 up for trade. I am looking for Varget or H4350.

Brazos Hunter · 05-20-2013, 03:45 PM

I know it's not the best time in the world to change recipes but I've done it so, I'm in need of a few pounds of H414 (could use some LR primers too). I have a digital powder scale, H4831, IMR3031 and IMR4350 to trade. Shoot me a PM if you want to trade. I will also be more than happy to pay cash for what I need.

~Michael

BuckySWT · 05-20-2013, 03:51 PM

Quote:

Originally Posted by Brazos Hunter

I know it's not the best time in the world to change recipes but I've done it so, I'm in need of a few pounds of H414 (could use some LR primers too). I have a digital powder scale, H4831, IMR3031 and IMR4350 to trade. Shoot me a PM if you want to trade. I will also be more than happy to pay cash for what I need.

~Michael

PM sent, brother

Brazos Hunter · 05-20-2013, 03:59 PM

Replied. Thanks brother!

I can still use a couple pounds of H414 if anyone has some to part with. Cash or trade...

BigTex.308 · 05-21-2013, 10:13 PM

Put some 9mm brass up for trade.

http://discussions.texasbowhunter.co...d.php?t=377537

Also have some CCI Large Pistol Primers I'd trade for Small Pistol. anywhere from 100-4,000. I'd trade any amount whatever you want to

Ike

sierracharlie338 · 08-13-2013, 04:19 PM

I be needing some H4350 if any one has some to trade for

Wildman · 08-13-2013, 04:25 PM

How about some #8 shot close to Austin. Don't want to have to drive to Alpine

Brazos Hunter · 08-13-2013, 04:30 PM

I'm still on the lookout for Speer Gold Dot HP 124gr 9mm bullets. I use to get 'em online all day long for @ $24.50/100. I was just surfing the web again for them and found one guy that had 10 box's at $60 + $9.95 shipping each and he will not combine shipping... Give me a break, that is just wrong!

duckmanep · 08-13-2013, 05:23 PM

Looking for 380 brass and possibly a Lee Pro 1000 or Loadmaster if the price/trade is right.

bluelund79 · 08-13-2013, 05:24 PM

Ill keep my eyes open for you Michael. Hope the healing is going well

Muzzy100 · 08-13-2013, 09:30 PM

I have a box of 1000 cci small magnum pistol primers. I bought them on 8/10/13 on accident. I would like to trade for regular small pistol primers. Someone would really be helping me out I didn't realize that they were
Magnums
Pm me thanks
Muzzy100

Wildman · 08-14-2013, 10:12 AM

#8 bird shot......... I am looking for some #8 lead

zero-in · 08-14-2013, 03:44 PM

Looking for a case trimmer with collets for 30.06, 8mm mauser, .303 brit., .223 and 7.62X54R or just the case trimmer and I'll track down the collets. I looked at getting a Sinclair trimmer to chuck into my drill, but is a little cost prohibitive, so I'm keeping an eye out for alternatives. Oh...if anyone has a working brass tumbler that they could part with used, please let me know as well. Thanks!

gandergitter · 08-24-2013, 01:11 PM

Ive got an RCBS 505 scale Id like to get rid of.
Lookins for a digital scale or large rifle primer priming tool

Also, Swift Scirocco 2, 180 gr, .308 dia
Ill put up cash for the difference

bluelund79 · 08-24-2013, 04:51 PM

I've got 59pcs of 7mm mag brass that's been tumbled (55 brass, 4 nickel) and 44 or so pieces of 45 colt brass that's been tumbled and deprimed (mix of brass and nickel, more of it brass). Both were 1x fired by me or my buddy. Looking for other brass or projectiles-243, 30/06, 10mm, 44mag, 38/357, 25/06

db@100 · 08-25-2013, 08:40 AM

Quote:

Originally Posted by Wildman

#8 bird shot......... I am looking for some #8 lead

Have you found your #8's yet?

BigTex.308 · 08-25-2013, 10:43 AM

I have some .38spl, .38super, and .357sig brass.

http://discussions.texasbowhunter.co...d.php?t=396339

Ike

Bubbabowhunter · 08-25-2013, 12:53 PM

I have some .243 remington brass that I would like to trade for some 7mm-08 brass. Maybe a two (.243) for one (7mm-08) deal if anyone is interested.

Jethro · 08-26-2013, 03:01 PM

Or you could try necking that .243 up to 7-08 and shoot it as long as the necks didn't get too thin. 7-08 necked down to .243 you would have to turn or ream the necks to get rid of the extra thickness.

dclifton · 08-26-2013, 03:15 PM

I've got a RCBS jr3 press over in classifieds for sale.

Bubbabowhunter · 08-29-2013, 07:05 PM

Quote:

Originally Posted by Jethro

Or you could try necking that .243 up to 7-08 and shoot it as long as the necks didn't get too thin. 7-08 necked down to .243 you would have to turn or ream the necks to get rid of the extra thickness.

I wouldn't mind trying this but my 7-08 die is a neck sizing die.

sierracharlie338 · 08-31-2013, 10:14 PM

Looking for some H4350 or RL-19 in the Houston area…

Sierracharlie out….

sierracharlie338 · 09-21-2013, 07:17 PM

Found both powders. How about some 168 Sierra BTHP or 175s?

04-28-2013, 01:28 PM	#55
bluelund79 Pope & Young Join Date: Mar 2011 Location: Billings, MT Hunt In: MT, WY, KY, TX, WI	Sounds fair enough to me Michael. Ill let em sit here for a couple days. All your stuff is already in the trunk for Ike. edit: SierraCharlie338, pm responded. Hornady's spoken for Last edited by bluelund79; 04-28-2013 at 01:35 PM.

08-14-2013, 03:44 PM	#90
zero-in Eight Point Join Date: Sep 2012 Location: San Antonio Hunt In: Comal County, Central Wisconsin	Looking for a case trimmer with collets for 30.06, 8mm mauser, .303 brit., .223 and 7.62X54R or just the case trimmer and I'll track down the collets. I looked at getting a Sinclair trimmer to chuck into my drill, but is a little cost prohibitive, so I'm keeping an eye out for alternatives. Oh...if anyone has a working brass tumbler that they could part with used, please let me know as well. Thanks! Last edited by zero-in; 08-14-2013 at 03:51 PM. Reason: edit items

08-31-2013, 10:14 PM	#99
sierracharlie338 Pope & Young Join Date: Dec 2011 Location: The Republic of Texas (Houston) Hunt In: Anywhere I can.... seems to be pretty limited these days	How about a trade thread for reloading components. Looking for some H4350 or RL-19 in the Houston area… Sierracharlie out…. Last edited by sierracharlie338; 08-31-2013 at 10:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-28-2013, 09:44 AM	#52
bluelund79 Pope & Young Join Date: Mar 2011 Location: Billings, MT Hunt In: MT, WY, KY, TX, WI	I have 52 pieces of 100gr Hornady Interlok sp 257cal. I'd like to swap them for either the same in 117gr or similar construction in 308 165gr.

04-28-2013, 09:52 AM	#53
Brazos Hunter Pope & Young Join Date: Jul 2011 Location: BCS and POC Hunt In: Where invited	Wish I could help you Eric. The smallest I have is 175gr 30 cal. If you decide to sell your 257's, my partner at work is interested.

04-28-2013, 11:05 AM	#54
sierracharlie338 Pope & Young Join Date: Dec 2011 Location: The Republic of Texas (Houston) Hunt In: Anywhere I can.... seems to be pretty limited these days	Pm sent Eric.

04-30-2013, 10:02 AM	#56
redneck82 Ten Point Join Date: Oct 2006 Location: NW Houston, TX Hunt In: Walker County	My brother found (68) 85grn .243 bullets that we don't need. Would like to trade for small pistol primers, but I am open to other ideas.

04-30-2013, 11:38 AM	#57
El Viejo Pope & Young Join Date: Jul 2012 Location: Formerly Mission, now Irving Hunt In: Where ever I can	I have 1,000 Remington #2 1/2 Large Pistol Primers that I would like to trade for an equal number of small pistol primers. I am in the RGV (Mission) & don't want to mail so would need express or FTF.

04-30-2013, 06:31 PM	#58
sierracharlie338 Pope & Young Join Date: Dec 2011 Location: The Republic of Texas (Houston) Hunt In: Anywhere I can.... seems to be pretty limited these days	Redneck82 What kind of bullets are they?

04-30-2013, 06:43 PM	#59
Brazos Hunter Pope & Young Join Date: Jul 2011 Location: BCS and POC Hunt In: Where invited	Good to see you today Ike. Eric, I hope you enjoy your new toyz/gifts...

04-30-2013, 06:54 PM	#60
bluelund79 Pope & Young Join Date: Mar 2011 Location: Billings, MT Hunt In: MT, WY, KY, TX, WI	redneck82, payment sent, thank you. Michael, yours is inbound in the next couple minutes. Thanks again brother, next time I'm in that area, i'll let you know in advance. Eric

05-01-2013, 11:59 AM	#65
257 Six Point Join Date: Apr 2013 Hunt In: The whole world	I have one 8# container of Win 760 (unopend) i would like to trade for the same in Win 748 or IMR4064

05-01-2013, 01:55 PM	#66
redneck82 Ten Point Join Date: Oct 2006 Location: NW Houston, TX Hunt In: Walker County	257- Are you looking for a even # for # trade? Where are you located?

05-01-2013, 11:02 PM	#68
PSD Ryan Pope & Young Join Date: Jan 2011 Location: DFW Hunt In: Where I can	Well I've got it in the classifieds, but I've got 215 pieces of 9mm brass I'd like to trade for .45 acp brass.

05-01-2013, 11:10 PM	#69
Buck-N-Rut Ten Point Join Date: Nov 2006 Location: Abilene, Tx. Hunt In: Abilene/Brady	Anybody want to trade 9mm brass for 380 brass?

05-02-2013, 09:14 PM	#70
bustacap Ten Point Join Date: Jan 2012 Location: Cibolo Hunt In: Mason, Mexico	I really need some A1680! I have 3+ lbs of magpro, 3lbs of h380, 1lb of varget, RL (10,19,25).... Remington 7 1/2 small rifle primers, federal gm215m lmr primers, cci250 lmr primers, barnes tsx 62gr bt 22cal, .308 110gr vmax, .308 110gr sierra hp, .308 125gr TNT's, .308 155gr amax, cash..... Pm me if you have some to spare.

05-06-2013, 09:46 AM	#71
sierracharlie338 Pope & Young Join Date: Dec 2011 Location: The Republic of Texas (Houston) Hunt In: Anywhere I can.... seems to be pretty limited these days	Ttt

05-06-2013, 01:36 PM	#74
dclifton Pope & Young Join Date: Nov 2011 Location: Lindale Tx Hunt In: Lindale Tx, Crowell Tx, pearsall Tx	I'm goin home this weekend and I know I have 9mm 40sw 380 AMS 38spl brass that I will trade for bullets for 45 or 45 acp brass

05-06-2013, 03:20 PM	#75
smb250 Ten Point Join Date: Oct 2011 Location: Wharton County Hunt In: Wharton County, and Where ever I go	R&M in El Campo just got some more powder in. Varget, H110, IMR 4350 just some of what they got

05-07-2013, 11:30 AM	#76
Skyjunky Ten Point Join Date: Sep 2012 Location: Spring,Tx	I have: 1# Hogdon Clays 1# Accurate No. 7 Looking for Titegroup, Varget, bullets for 9mm or .40 S&W

05-13-2013, 11:20 AM	#77
oneforthewall Ten Point Join Date: Jul 2009 Location: Springtown, TX Hunt In: WY, CO, NM, TX	I have: 1# Hogdon International Clays-unopened, that I won't use and would like to trade for a lb of something I will.......watcha got?

05-13-2013, 01:18 PM	#78
Smitty Eight Point Join Date: Sep 2007 Location: Graham Hunt In: Young County	I have 2#'s of Hodgdon Super Performance and 1# of IMR4064 up for trade. I am looking for Varget or H4350.

05-20-2013, 03:45 PM	#79
Brazos Hunter Pope & Young Join Date: Jul 2011 Location: BCS and POC Hunt In: Where invited	I know it's not the best time in the world to change recipes but I've done it so, I'm in need of a few pounds of H414 (could use some LR primers too). I have a digital powder scale, H4831, IMR3031 and IMR4350 to trade. Shoot me a PM if you want to trade. I will also be more than happy to pay cash for what I need. ~Michael

05-20-2013, 03:59 PM	#81
Brazos Hunter Pope & Young Join Date: Jul 2011 Location: BCS and POC Hunt In: Where invited	Replied. Thanks brother! I can still use a couple pounds of H414 if anyone has some to part with. Cash or trade...

05-21-2013, 10:13 PM	#82
BigTex.308 Pope & Young Join Date: Aug 2010 Location: Montgomery, Tx Hunt In: The woods.	Put some 9mm brass up for trade. http://discussions.texasbowhunter.co...d.php?t=377537 Also have some CCI Large Pistol Primers I'd trade for Small Pistol. anywhere from 100-4,000. I'd trade any amount whatever you want to Ike

08-13-2013, 04:19 PM	#83
sierracharlie338 Pope & Young Join Date: Dec 2011 Location: The Republic of Texas (Houston) Hunt In: Anywhere I can.... seems to be pretty limited these days	I be needing some H4350 if any one has some to trade for

08-13-2013, 04:25 PM	#84
Wildman Pope & Young Join Date: Oct 2006 Location: Round Rock	How about some #8 shot close to Austin. Don't want to have to drive to Alpine

08-13-2013, 04:30 PM	#85
Brazos Hunter Pope & Young Join Date: Jul 2011 Location: BCS and POC Hunt In: Where invited	I'm still on the lookout for Speer Gold Dot HP 124gr 9mm bullets. I use to get 'em online all day long for @ $24.50/100. I was just surfing the web again for them and found one guy that had 10 box's at $60 + $9.95 shipping each and he will not combine shipping... Give me a break, that is just wrong!

08-13-2013, 05:23 PM	#86
duckmanep Pope & Young Join Date: Oct 2012 Location: Northeast TX	Looking for 380 brass and possibly a Lee Pro 1000 or Loadmaster if the price/trade is right.

08-13-2013, 05:24 PM	#87
bluelund79 Pope & Young Join Date: Mar 2011 Location: Billings, MT Hunt In: MT, WY, KY, TX, WI	Ill keep my eyes open for you Michael. Hope the healing is going well

08-13-2013, 09:30 PM	#88
Muzzy100 Ten Point Join Date: Feb 2010 Location: Texas Hunt In: All Over All The Time	I have a box of 1000 cci small magnum pistol primers. I bought them on 8/10/13 on accident. I would like to trade for regular small pistol primers. Someone would really be helping me out I didn't realize that they were Magnums Pm me thanks Muzzy100

08-14-2013, 10:12 AM	#89
Wildman Pope & Young Join Date: Oct 2006 Location: Round Rock	#8 bird shot......... I am looking for some #8 lead

08-24-2013, 01:11 PM	#91
gandergitter Ten Point Join Date: Mar 2009 Location: Bremond Hunt In: Franklin, Texas and Colorado	Ive got an RCBS 505 scale Id like to get rid of. Lookins for a digital scale or large rifle primer priming tool Also, Swift Scirocco 2, 180 gr, .308 dia Ill put up cash for the difference