Cutting carbon arrows

[TxKronik]

What do you use to cut your arrows specifically carbon arrows I am on a bit of a budget but would like something that works well

[PSD Ryan]

I do it like this, and follow up with a G5 ASD.

http://discussions.texasbowhunter.com/forums/showthread.php?t=330297

[TxKronik]

Any other ideas (unfortunately I don't have a angle grinder) it is on the list I have compound liters and sawsall and jig and skill but no angle grinder

[lesson 101]

Apple arrow saw @ 5000rpm

[lbbf]

Dremal

[Sabine]

Harbor Freight has a mini cut-off saw for about $30, works like a champ.

[Razorback01]

An option to the angle grinder is LBBFs note on the dremel tool. Works fine, make two cuts then the G5 Arrow Squaring Device.

[TxKronik]

I like that mini cut off wheel at harbor freight

[Limbwalker]

I just use a cut-off wheel in my Dremel tool, secured in my workbench with a vise. I put a wood "stopper" held in place with a clamp on the nock end, then rotate the shaft into the wheel by hand. If you're careful, it works great. ALWAYS wear safety glasses!