How about a trade thread for reloading components.

[JP8]

Looking for 140 Amax 6.5 projectiles

[trophy8]

I need some H4831SC in a bad way. Any help is appreciated!!

[JRG_80]

I've got some 264WM stuff that I'd like to get rid of, list below:
35rds 130gr Accubond and 5 pieces of brass
12rds 140gr Nosler Partion and 28 pieces of brass
20 pieces of Winchester brass
RCBS set of dies

jrg

[zac221]

Call the shooting store in Abilene. Went by the other day and they had a ton of IMR 4350, 4831sc, and several other.

[Mike D]

Anybody have 50 pieces of 5.56 brass to trade or sell? I need to finish off a box of reloads and I'm a little shy. If it's military brass, I need the primer pockets already prepped.

[Seacoal]

Anyone got any 180 gn Sierra soft point boat tails? Not sure I've got much to trade, but haven't had any luck finding any

[dclifton]

I've got 1k pieces of once fired 40 brass and lee 3die 40 set nib for trade. Looking for
Unique or varget, 44 bullets 44 mold, 45 bullets, 55gr fmj 223 bullets.

Located around the Tyler area.

[oneforthewall]

Originally Posted by Mike D

Anybody have 50 pieces of 5.56 brass to trade or sell? I need to finish off a box of reloads and I'm a little shy. If it's military brass, I need the primer pockets already prepped.

Mike, I prolly have some prepped already. Call me tonight and remind me to look.

[Gummi Bear]

Originally Posted by Mike D

Anybody have 50 pieces of 5.56 brass to trade or sell? I need to finish off a box of reloads and I'm a little shy. If it's military brass, I need the primer pockets already prepped.

I may as well.

I have brass from several manufacturers. Let me know what you need.

This is my brass prep checklist:

[texas bound]

I need some CCI 250M primers. Only need about 100 or so just to get me started. Dont have much to trade but am willing to buy them.

[Mike D]

Originally Posted by oneforthewall

Mike, I prolly have some prepped already. Call me tonight and remind me to look.

Originally Posted by Gummi Bear

I may as well.

I have brass from several manufacturers. Let me know what you need.

This is my brass prep checklist:
Attachment 621470

If one of you fine gentlemen could let me know for sure I would appreciate it.

Gummi you are a lot closer to my neck of the woods so if you have some that would be great.

[Gummi Bear]

What brass are you wanting, Mike?

I have RP, FC, WCC, LC (at least a few left, been cutting them into 300 BLK), PPU, a few Hornady and some other misc varieties.

Give me a call later on, and let me know.

[Gummi Bear]

Originally Posted by texas bound

I need some CCI 250M primers. Only need about 100 or so just to get me started. Dont have much to trade but am willing to buy them.

I don't have any to trade, but if you're out and about, Bass Pro did have some on the shelf. They might still, I haven't been by in a while. They will sell them in a card of 100.

[bowaddict40]

Does anybody need a factory crimp die brand new? Pm me if your interested.

[dclifton]

Originally Posted by Chasing_bone

Does anybody need a factory crimp die brand new? Pm me if your interested.

What caliber?

[bluelund79]

I have a set of barely used RCBS dies with shellholder in 300 Weatherby Magnum. Open to ideas for components or other caliber RCBS dies-25/06, 10mm/40S&W, 38spl/357mag

[mikebyrge]

If anyone needs reloader 15 or 17 I was in a shop in Shreveport today that had it.

[oneforthewall]

Originally Posted by Mike D

If one of you fine gentlemen could let me know for sure I would appreciate it.

Gummi you are a lot closer to my neck of the woods so if you have some that would be great.

I did find some LC if you will be out to Poolville anytime in the near future.

[Mike D]

Originally Posted by Gummi Bear

What brass are you wanting, Mike?

I have RP, FC, WCC, LC (at least a few left, been cutting them into 300 BLK), PPU, a few Hornady and some other misc varieties.

Give me a call later on, and let me know.

Jason LC would be my preference but I wouldn't turn down any FC or WCC.

[Gummi Bear]

I'll set some aside for ya!

[sutherpride59]

I've got a bunch of reload dies my father in law gave me in odd-ball caibers, I'll post em when i get home.

[mesquitecountry]

Storied Firearms had a few miscellaneous primers and had RL 17, 19, and 25 and 2000 mr

[JP8]

Looking for 140Amax 6.5 projectiles

[trooperjd]

I'm looking for some 257 Robert brass. Got a gun coming but no ammo locally.

I've got some:

223 decaped Winchester once fired
223 55 or 50 grain vmaxes
223 Sierra BTHP
357 sig once fired brass and nickel
Maybe even some factory 223 hunting ammo

[rossivey]

got 1000 WLR primers available

[Mike D]

Originally Posted by texas bound

I need some CCI 250M primers. Only need about 100 or so just to get me started. Dont have much to trade but am willing to buy them.

Eric you still need some of these?

[cajuntec]

I need a box of 165 grain Sierra Game King SBT, .30 cal, Sierra #2145

I should have ordered more than one box when they were available. Now I'm getting low, and I need at least one box.

I have other bullets that I'd be willing to trade if interested in swapping.

All the best,
Glenn

[Physhstyx]

Originally Posted by cajuntec

I need a box of 165 grain Sierra Game King SBT, .30 cal, Sierra #2145

I should have ordered more than one box when they were available. Now I'm getting low, and I need at least one box.

I have other bullets that I'd be willing to trade if interested in swapping.

All the best,
Glenn

Where are you located. I think Big guys in pearland has some.
I will look when I get home I may have some as well.

[cajuntec]

Originally Posted by Physhstyx

Where are you located. I think Big guys in pearland has some.
I will look when I get home I may have some as well.

Thanks! I'm in San Antonio, on the far NW side (Alamo Ranch, over by Sea World).
All the best,
Glenn

[Old Bald Guy]

I need some 22 caliber Barnes TSX bullets. 45 gr. and 50 gr.

[bluelund79]

Still have the 300 Weatherby mag RCBS dies and she'll holder for swap. I'd be looking for 10 mm brass, 62gr Barnes Tsx .224 bullets, etc

[Artos]

Just used up the last of my 22cal 75gr HPBT Hornady's...disty's seem to be out.

Looking for the 600 count if anyone comes across.

gracias!!

[SabreKiller]

Ramshot Competition Powder, Solo 1000, WST. Also need some large pistol primers.

I got some CCI250 primers to trade or sell if anyone needs them. Probably have close to 1000.

[sir shovelhands]

Originally Posted by SabreKiller

Ramshot Competition Powder, Solo 1000, WST. Also need some large pistol primers.

I got some CCI250 primers to trade or sell if anyone needs them. Probably have close to 1000.

It's too bad we don't live closer. I'd trade you a load of Win LP primers for those CCI250s.

[bustacap]

Originally Posted by cajuntec

I need a box of 165 grain Sierra Game King SBT, .30 cal, Sierra #2145

I should have ordered more than one box when they were available. Now I'm getting low, and I need at least one box.

I have other bullets that I'd be willing to trade if interested in swapping.

All the best,
Glenn

Pm on the way

[Artos]

Originally Posted by Artos

Just used up the last of my 22cal 75gr HPBT Hornady's...disty's seem to be out.

Looking for the 600 count if anyone comes across.

gracias!!

You can add Vit N140 powder to the list...down to my last pound after reloading the swift this weekend

I hope the reloading guy shows up to the next saxet show!!!!!

[H-D]

Artos...in stock right now!!

http://www.sportsmanswarehouse.com/s...6455/cat100151

[Kruzifux259]

Originally Posted by Mike D

Anybody have 50 pieces of 5.56 brass to trade or sell? I need to finish off a box of reloads and I'm a little shy. If it's military brass, I need the primer pockets already prepped.

I might have this... at work now. Ill check when I get home. Thats one good thing being next to Ft Hood. Crap ton of people have ARs and I pick up all my brass from the range.

[Kruzifux259]

For those in central TX that like Hodgdon and IMR, Webers in Temple usually keeps their stock pretty well. Im an IMR guy and it goes for $30 a pound. The stock of primers isnt too bad. Bullets are the hardest there. I usually suck up all their 223, 30 cal and 40s if they ever have it.

[Kruzifux259]

Here is a long shot.... LF an older model RCBS Uniflow with stand.

[Artos]

Originally Posted by H-D

Artos...in stock right now!!

http://www.sportsmanswarehouse.com/s...6455/cat100151

Thanks amigo...I try to avoid online unless we can get a group buy together & split up the silly hazmat fee. This may be something we need to consider in the future. Haven't checked with Mark, but cannot find any Reloader 15. No hurry, but seems to be one of the more popular powders to find.


Anyway, Glad you pointed this out!!

I just got back from Danny's and they found two pounds in the back!! Been a while since I had to get any and cannot believe the vit line is up to $40/lb but it is the ticket for my swift. 3lbs total should cover me for a while!!

saludos...

[hoythitman]

Need some H110, W296, Lil' Gun have 1 lb of 4895 to trade also have cash. I'm in San Antonio, willing to travel around an hour, maybe a little more.

[cajuntec]

Originally Posted by bustacap

Pm on the way

Wanted to publicly thank bustacap for doing a trade with me, and going out of his way to swap the bullets. I greatly appreciate it. This is the second time he has hooked me up with reloading components, and I just wanted to say "Thanks!".

All the best,
Glenn

[treestand]

I need a set of 7.62 x 39 dies, some brass and some bullets for same. I want to see if my AK accuracy will improve with handloads. I can trade dies for some calibers - have a bunch - or maybe some bullets or brass. Willing to pay cash as well.

[Mike D]

Can anyone spare (15) 6.5mm 130 grain Nosler Accubonds and (20) .224 Hornady 50 grain VMax bullets?

I have tons of trade bait. Just let me know what you are looking for.

I tried to buy what I needed from bulletsamples.com but I can't even get them to return an email.

[rossivey]

Got 1000 Winchester Large Rifle Primers for trade/sale

[webstertroy]

Hey guys I am picking up a 308 tonight... I am going to use a lee hand loader.. I am looking for some bullets and brass or anything that could help!!!

[sir shovelhands]

Webstertroy: I've got two boxes of 175 SMKs I'd ship to you for midway price, send me a PM if you're interested.

Anyone have H110/W296 or H1000 they'd trade/sell in houston? I've got just shy of 4# of lil' gun and two 1# cans of longshot I'd like to pass on.

[webstertroy]

thanks sir let me get this 223-556 ammo sold tonight and ill get with ya...

[trooperjd]

I have a 250rd box of 20 cal 32 gr Hornady vmax. Would like to trade for 40 gr vmax, 40 gr noslers or sierras.

Also have one pound of unopened H380 powder. Would like to trade for H4350, Varget or H322.