Feed pen question

[Kooter80]

How many panels and t post do y’all use to make a feed pen? Will have a spin cast feeder inside pen.

[SHSU18]

i have 10 with a big protein, corn feeder, and alfalfa feeder in it. 8 will work for just a corn feeder...but the bigger the better!

[riverbowman]

I used 8, but I feel like it should be bigger so I'm increasing to 12 this year. Several times I've seen deer walk up to it and walk off when there are already several in there.

[Traildust]

16

[yotethumper]

As big as you can!

[hog_down]

Like what was said before, the bigger the better.

[Hoss163]

12 panels 3 tee post on each panel put in a circle

[SaltwaterSlick]

We use 16 panels with 33 t-Posts... Thats a t-post at each end of each panel and one in the middle of each panel... overlap panels 1 square and wire to each other and to the posts... That will give you a pen 24 yards diameter. We use the 34" hog panels. Easy to lay out too. We take a string and a stake it where we want the feeder, then tie a can of striping paint in the string at 12 yards and make a paint stripe on the ground. Pull the stake, place the feeder, then put panels up on the paint stripe and stake 'em down.

[jason86]

22 panels in mine

[ClayW]

As big as you can!

This^^^

[TXBRASS]

Like what was said before, the bigger the better.

x 2

[TXBRASS]

70’ across.




Sent from my iPhone using Tapatalk

[sideways]

I’m not saying that bigger isn’t better but my pen is made with 4 panels and is full of deer morning and evening


Sent from my iPhone using Tapatalk Pro

[Tex21]

Ive got some with 10 panels(5 cut in two) and some with 8 panels (4 cut in two).... Both sizes are always filled with deer.

[bigbad243]

I’m not saying that bigger isn’t better but my pen is made with 4 panels and is full of deer morning and evening


Sent from my iPhone using Tapatalk Pro

What is full of deer? Bc I have 15-30 at each feeder and they would not get into a pen that small