Mr. Buddy heaters

[gatt40]

Needs cleaning. I think I used a paper clip to loosen carbon build up then an alcohol soaked q- tip. I did strip away some of the cotton on the tip so it fit inside the orifice. YouTube is your friend.

[Dale Moser]

If the ODS cutting it off, you should be able to see the pilot flame raising up off the thermocouple before it cuts off, that’s how they are designed to work.


Sent from my iPhone using Tapatalk

[DRT]

Originally Posted by Dale Moser

If the ODS cutting it off, you should be able to see the pilot flame raising up off the thermocouple before it cuts off, that’s how they are designed to work.


Sent from my iPhone using Tapatalk

Yup. If I leave a window open it works. Kind of defeats the purpose. I need the windows shut on a northern wind. Oh well. Sitka Fanatic to the rescue.

Sent from my SM-G892A using Tapatalk

[Dale Moser]

If it’s cutting off due to that, then it’s looking out for you. Just crack a window and it should do fine.


Sent from my iPhone using Tapatalk