And a fishing pole holder for me - TexasBowhunter.com Community Discussion Forums

BowOnly81 · 01-09-2017, 06:21 PM

Just ordered some cue stick holder/clip things from amazon and bam. Routered 1/4" deep holes into the bottom 1x4 to keep them in place and then added some stain.

rswell2 · 01-09-2017, 06:36 PM

This looks perfect! I saw some at ****'s last week for about $7. I wasn't sure if they would work, but it's great. The rod specific holders are closer to $20. I'll be doing this now.

gonehuntin · 01-09-2017, 07:27 PM

Great idea on the rod holders.

Carpe_diem · 01-19-2017, 02:17 PM

Good idea! Could you post a close-up picture of the bases? I'd like to see how you did that.

BowOnly81 · 01-19-2017, 08:42 PM

Routered holes about 1/4" deep every 5.5" on center. They may be 1 1/8" in diameter. Just 1x4's. That help?

BowOnly81 · 01-19-2017, 08:43 PM

Here's another. And thanks for the compliments.

kevin nicholls · 01-19-2017, 08:46 PM

Nice work, Lee. That's better than putting them up against the work bench.

BowOnly81 · 01-19-2017, 08:47 PM

Quote:

Originally Posted by kevin nicholls

Nice work, Lee. That's better than putting them up against the work bench.

For sure. Thanks Kevin.

dustoffer · 01-19-2017, 09:33 PM

Got mine hanging on nails driven into the shelf edge

UncleBubba · 01-19-2017, 09:41 PM

Very nice!

Hix · 01-20-2017, 12:56 AM

Nice I've been wanting to do this.

Sent from my iPhone using Tapatalk

MorenoXL · 01-21-2017, 04:33 PM

Nice work looks good.

Sent from my iPad using Tapatalk

Bowyer · 01-22-2017, 05:31 AM

Nice job! Great idea

Sent from my SAMSUNG-SM-G900A using Tapatalk

JKS · 01-22-2017, 06:21 AM

Nice DIY gonna have to try it

Full Throttle · 01-22-2017, 07:51 AM

I need about 3 of those... nice work!

Carpe_diem · 01-23-2017, 01:27 PM

Yes, that helps a lot - thanks!

carpet2 · 01-31-2017, 03:39 PM

Nice job !

Nado · 01-31-2017, 03:46 PM

Nice job! Might want to add a dependable door stopper, dont want a swinging door to knock of the eye on those rods off.

Whale · 04-02-2017, 09:15 PM

Nice work

Russ79 · 04-02-2017, 09:39 PM

I think that is more fishing poles than I have ever owned in my whole life.....Good job.

Bjankowski · 04-04-2017, 08:03 PM

Good idea; I need to do that at my lake house where I keep all my rods and reels and my bass boat. Right now when I leave I put them in a corner, we have 18 rods and reels.

BowOnly81 · 04-04-2017, 09:01 PM

Thanks guys.

bigblock78 · 09-06-2022, 09:21 AM

very nice work!

Leon County Slayer · 09-08-2022, 12:03 PM

Nice,
I just throw mine on top of my toolbox and let the garage door break them in half

lizardslick · 09-08-2022, 12:38 PM

Looks great!

Lights Out · 09-11-2022, 05:16 PM

Mighty fine work

01-09-2017, 06:21 PM	#1
BowOnly81 Pope & Young Join Date: Jul 2014 Location: Conroe, TX Hunt In: SHNF and Trinity Co.	And a fishing pole holder for me Just ordered some cue stick holder/clip things from amazon and bam. Routered 1/4" deep holes into the bottom 1x4 to keep them in place and then added some stain. Attached Images

01-19-2017, 08:42 PM	#5
BowOnly81 Pope & Young Join Date: Jul 2014 Location: Conroe, TX Hunt In: SHNF and Trinity Co.	Routered holes about 1/4" deep every 5.5" on center. They may be 1 1/8" in diameter. Just 1x4's. That help? Attached Images

01-19-2017, 08:43 PM	#6
BowOnly81 Pope & Young Join Date: Jul 2014 Location: Conroe, TX Hunt In: SHNF and Trinity Co.	Here's another. And thanks for the compliments. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2017, 06:36 PM	#2
rswell2 Four Point Join Date: Dec 2010 Location: Kentucky Hunt In: Kentucky	This looks perfect! I saw some at ****'s last week for about $7. I wasn't sure if they would work, but it's great. The rod specific holders are closer to $20. I'll be doing this now.

01-09-2017, 07:27 PM	#3
gonehuntin Ten Point Join Date: Jul 2007 Location: Turlington,Tx Hunt In: Freestone,Navarro,Llano	Great idea on the rod holders.

01-19-2017, 02:17 PM	#4
Carpe_diem Ten Point Join Date: Mar 2007 Location: Abilene, TX Hunt In: Taylor, Fisher, Jones Counties and TPW draw hunts	Good idea! Could you post a close-up picture of the bases? I'd like to see how you did that.

01-19-2017, 08:46 PM	#7
kevin nicholls Ten Point Join Date: Nov 2010 Location: pasadena tx Hunt In: Who knows	Nice work, Lee. That's better than putting them up against the work bench.

01-19-2017, 09:33 PM	#9
dustoffer Pope & Young Join Date: Sep 2009 Location: Seguin, Tx Hunt In: S/Central Tx	Got mine hanging on nails driven into the shelf edge

01-19-2017, 09:41 PM	#10
UncleBubba Pope & Young Join Date: Aug 2012 Location: NE Texas Hunt In: Dickens, Hunt, and Red River Co.	Very nice!

01-20-2017, 12:56 AM	#11
Hix Ten Point Join Date: Sep 2015 Location: North Longview Hunt In: East Texas- Gregg Co., Cass & Marion Co.	Nice I've been wanting to do this. Sent from my iPhone using Tapatalk

01-21-2017, 04:33 PM	#12
MorenoXL Four Point Join Date: Aug 2015	Nice work looks good. Sent from my iPad using Tapatalk

01-22-2017, 05:31 AM	#13
Bowyer Ten Point Join Date: Feb 2013 Location: Barry Tx. Hunt In: Texas & Oklahoma	Nice job! Great idea Sent from my SAMSUNG-SM-G900A using Tapatalk

01-22-2017, 06:21 AM	#14
JKS Four Point Join Date: Nov 2016 Location: San Marcos Hunt In: Devine, Comfort, Hays county	Nice DIY gonna have to try it

01-22-2017, 07:51 AM	#15
Full Throttle Eight Point Join Date: Jan 2014 Location: Flower Mound Hunt In: Woodson, TX & Burneyville, OK	I need about 3 of those... nice work!

01-23-2017, 01:27 PM	#16
Carpe_diem Ten Point Join Date: Mar 2007 Location: Abilene, TX Hunt In: Taylor, Fisher, Jones Counties and TPW draw hunts	Yes, that helps a lot - thanks!

01-31-2017, 03:39 PM	#17
carpet2 Spike Join Date: Jan 2017	Nice job !

01-31-2017, 03:46 PM	#18
Nado Eight Point Join Date: Oct 2013 Location: Corpus Christi	Nice job! Might want to add a dependable door stopper, dont want a swinging door to knock of the eye on those rods off.

04-02-2017, 09:15 PM	#19
Whale Ten Point Join Date: Jul 2008 Location: Grayson Co. Hunt In: Grayson & Red River Co.	Nice work

04-02-2017, 09:39 PM	#20
Russ79 Ten Point Join Date: Oct 2006 Location: Nacogdoches, Tx Hunt In: Nacogdoches county, San Augustine county, Beaufort county NC	I think that is more fishing poles than I have ever owned in my whole life.....Good job.

04-04-2017, 08:03 PM	#21
Bjankowski Associate Sponsor Join Date: Dec 2008 Location: Burleson Tex. Hunt In: Texas	Good idea; I need to do that at my lake house where I keep all my rods and reels and my bass boat. Right now when I leave I put them in a corner, we have 18 rods and reels.

04-04-2017, 09:01 PM	#22
BowOnly81 Pope & Young Join Date: Jul 2014 Location: Conroe, TX Hunt In: SHNF and Trinity Co.	Thanks guys.

09-06-2022, 09:21 AM	#23
bigblock78 Six Point Join Date: Jan 2017 Location: Stockdale Hunt In: DeWitt & Wilson	very nice work!

09-08-2022, 12:03 PM	#24
Leon County Slayer Pope & Young Join Date: Oct 2006 Location: Houston Hunt In: Camo (Leon County) - Knifemaker<><	Nice, I just throw mine on top of my toolbox and let the garage door break them in half

09-08-2022, 12:38 PM	#25
lizardslick Spike Join Date: Aug 2022	Looks great!

09-11-2022, 05:16 PM	#26
Lights Out Eight Point Join Date: Nov 2009 Location: Hurst Hunt In: Wise County	Mighty fine work