Barbed wire,, and brush cutters question

[gonehuntin]

Knipex wire cutters

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This right here. Best cutters ever made for cutting barb wire from under a brush hog.

[T-REX]

cutting torch is easiest if you have access to one. A little heat and the wire usually busts and springs open by itself.

[Buckshot-73]

Thanks all for the response

[softpoint]

Be careful with a torch, or you will trash the seal. Torch is one of the better ways to get the stuff off. You may have to pull the stump jumper, if there isn't enough room. I've winched a ball of poultry netting under one before, too.......That stuff is a PITA....

[Traildust]

Torch makes quick easy work out of it. Use wirecutters if you like aggravation.

[Stan R]

Knipex wire cutters

0So which one for cutting barbed wire. They only mark about 1000 different cutters

[gonehuntin]

Stan, the Knipex CoBolt Fencing compact bolt cutters Model # 71 01 200R and # 71 21 200 are the one's I have. They cut barb wire like no other cutters I have ever used.

[Stan R]

Stan, the Knipex CoBolt Fencing compact bolt cutters Model # 71 01 200R and # 71 21 200 are the one's I have. They cut barb wire like no other cutters I have ever used.

Thanks Just ordered a set.

I am re-doing front and back fences.

Just finished clearing the first 450 feet.

[Kingfisher789]

Been there. Fence wire tool and start cutting.

Yep...and some hope

[Buckshot-73]

I did pick up from several YouTube I watched, to paint the blade bolts and gearbox shaft with anti seize.

Seems like a good time to do it now.

[Jeremy7306]

At least you didn’t get the tractor stuck.....



















Again.......


Sent from my iPhone using Tapatalk

[Buckshot-73]

LMAO.
Not only tractor, truck and trailer too.

[Everett Miles]

BOENF product is among some of the best spring loaded wire cutters that you can reliably buy in the market. The blade’s pivot point is built with a spring that helps you perform wiring tasks easier.

[Texas452]

I just flip mine up and lean it against a tree with the loader when I need to mess with the blades.

This
If you have a front end loader.

[tps7742]

Stan, the Knipex CoBolt Fencing compact bolt cutters Model # 71 01 200R and # 71 21 200 are the one's I have. They cut barb wire like no other cutters I have ever used.

What website did you order these from? Thanks