Planning on putting a food plot in for the first time. Got it shredded and disced up. Gonna have to plant the beginning of may.
Announcement
Collapse
No announcement yet.
Food plot prep. 1st attempt
Collapse
X
-
Originally posted by RCDuck View Postlooks good.... are you planning on spraying before planting, or planting gly tolerant soybeans? If not, that grass is most likely to come back really strong, plus all the other weed seed that was already in the soil waiting for a disturbance.
Comment
-
Originally posted by rut-ro View PostI planned on running a disc again. I’ll look into spraying. What do you spray ?
On a new plot I plant buckwheat for a season or two in the spring. It has lots of soil benefits plus it grows so fast and thick it chokes out weeds and grasses. Good luck !
Comment
-
Originally posted by Drycreek3189 View PostGeneric glyphosate from Tractor Supply is what I use. If that’s bermuda it’s pretty hard to kill. Gly at 2.5 oz. per gallon of water, wait a week to 10 days and disc. If you plant Roundup Ready beans you can spray them again after they get 8”/10” tall and kill whatever weeds and grass came up. It won’t harm the beans. You really need a soil test to know how much lime, if any, and how much of what kind of fertilizer you need.
On a new plot I plant buckwheat for a season or two in the spring. It has lots of soil benefits plus it grows so fast and thick it chokes out weeds and grasses. Good luck !
This.... with a question for Dry Creek.... if you mix 2.5 oz per gallon how much Gly are you applying per acre? I think with the low volume my sprayer sprays, 2.5 oz per gallon would be a really light application.
Comment
-
I spray from a 25 gallon Fimco with two spray nozzles on a bar, covers about 10’/12’ wide. I also spray with a 60 gallon PTO driven rig on my tractor that covers about 25’ wide. I don’t worry about acres, because most of my plots are irregular and acreage is hard to figure. I travel about 3 mph in either my CanAm or my tractor and wet the vegetation. I know lots of guys go quarts per acre, but I’ve just learned to guess pretty closely at how much mix I’m gonna need. Sometimes I miss it a little, but usually I have a few gallons left. I just spray it on the thickest or tallest part of whatever I’m trying to kill. It may not be scientific, but it works for me.
Comment
Comment