When tuning for broadheads, has anyone had to move your field points TO your broadheads? I always thought you moved your broadheads to your field points. They are touching each other at 20 yards, but when I go to 40, the BH's are hitting to the right. So I move my rest to the left a bit. The BH's essentially stayed in the same location and my FP's moved to the left (away from the BH's). When I move the FP's to the BH's, they get closer, but the BH's start to go high.
The arrows all spin out true with BH's or FP's. BH"s group together and FP's group together. I'm shooting Carbon Express Maxima Red SD's (350). My local bow shop says my cams are timed and shimmed correctly.
Is this a form issue, some sort of axis issue with my rest (QAD HDX) or is there a chance of this being a fletching issue (I just recently started fletching my own arrows, 4 fletch, 90 deg right helical with a bit of an offset on the front)?
The arrows all spin out true with BH's or FP's. BH"s group together and FP's group together. I'm shooting Carbon Express Maxima Red SD's (350). My local bow shop says my cams are timed and shimmed correctly.
Is this a form issue, some sort of axis issue with my rest (QAD HDX) or is there a chance of this being a fletching issue (I just recently started fletching my own arrows, 4 fletch, 90 deg right helical with a bit of an offset on the front)?
Comment