How about a trade thread for reloading components.

[JohnnyI]

Looking for some Berger bullets .308
185 gr Match Juggernaut Target (30418)

[sierracharlie338]

Still have 2K large rifle primers I need to trade in the Houston area.

[txnduckhntr]

I have RCBS 223 and 270 weatherby dies I don't use....k


Looking for 270winchester dies, hand priming tool, and a scale...I got cash to boot

[gandergitter]

Lets bump this b ack into rotation...
Looking for .223 dies
.243 dies
calipers
Case trimmer

Not a lot to trade, but looking to buy if someone needs to cull the bench

[snipermedic]

I poster lee 223 dies in classifieds.
I have 1000 dog town 55gr. HP's .224's

Need 300 win mag FL dies

[bearintex]

I have a bunch of range pickup mixed stamp 40SW brass. I don't have a 40. I do have and reload for 9 and 45. It will be tumbled but not decapped. Any interest and I will get a firm count.

[Brazos Hunter]

I have a Lee Pro1000 with 3 bases and 4-5 base plates, two turets, and both large and small primer trays. I may put another one up for grabs too...

[bearintex]

I have a Lee Pro1000 with 3 bases and 4-5 base plates, two turets, and both large and small primer trays. I may put another one up for grabs too...

What caliber bases? I might be interested. I have two currently, one in 9 and one in 45. I do all mine in batches, decapping and sizing, then tumbling and hand priming. If I could get a third and set it up specifically for this step it would save me a lot of set up time.

[Brazos Hunter]

What caliber bases? I might be interested. I have two currently, one in 9 and one in 45. I do all mine in batches, decapping and sizing, then tumbling and hand priming. If I could get a third and set it up specifically for this step it would save me a lot of set up time.

two No 2 plates, one No 19 plate and a No 9 plate

[mesquitecountry]

How about a trade thread for reloading components.

I have 7828 SSC, 4064, h335, and 4350 looking to trade to get some Varget.

Also looking for 6.5 Berger hybrid 140's.


Also looking for 220 swift brass.

I'm in Austin, travel to SA often and Dallas once or twice a month.

[SCREAMINREELS]

cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun

about half a box (50ish) Speer 100gr BTSP 243

1 sealed box 30cal speer btsp 165gr

1 full set RCBS 300 win mag dies- very lightly used

1 full set RCBS 22-250 dies

I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point

7mm mag stuff, have gun I haven't shot will need everything for it

some sierra or other quality hunting bullets for 243 to try loads on (light rounds)

168 smks or 165 sgk in 30 cal

varget powder.

[dpg481]

I have a set of 444 marlin dies, crimp die, .44 cal bullets and new and used brass.

[colestaton]

Have-RCBS 270 wsm dies
RCBS 6mm dies
100 sierra .308 165gr gameking HPs
100 6mm 87gr berger vld hunting
100 6mm 55 grain blitzking
20 .308 Sciroccos 150 gr
H4831



Need- 300 RUM brass and 338 bullets 250 grain or more.

[snipermedic]

cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun

about half a box (50ish) Speer 100gr BTSP 243

1 sealed box 30cal speer btsp 165gr

1 full set RCBS 300 win mag dies- very lightly used

1 full set RCBS 22-250 dies

I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point

7mm mag stuff, have gun I haven't shot will need everything for it

some sierra or other quality hunting bullets for 243 to try loads on (light rounds)

168 smks or 165 sgk in 30 cal

varget powder.

Which. 300 dies and how much ?

[canny]

cleaned out my bench...I have
1 pound sealed can of IMR 4831
1/2 can left of hodgdon H 4831SC.. used to work up a load and found a better powder for the gun

about half a box (50ish) Speer 100gr BTSP 243

1 sealed box 30cal speer btsp 165gr

1 full set RCBS 300 win mag dies- very lightly used

1 full set RCBS 22-250 dies

I could use:
40 sw cal set up (bullets, dies, brass, powder for pistols?) I only reload rifle at this point

7mm mag stuff, have gun I haven't shot will need everything for it

some sierra or other quality hunting bullets for 243 to try loads on (light rounds)

168 smks or 165 sgk in 30 cal

varget powder.

I have a lot of 7mm and 243 bullets as well as 7mm brass. I've been wanting to try the H4831SC. I'm sending you a PM with my contact info. I'm in Arlington.