I made one!

[Sunshine]

oh.......nice rack

[salth2o]

Skeeter...that looks great! I now have something to do on Saturday morning. Is it too much trouble to as you to get a few quick, rough measurements?

[skeeter]

Skeeter...that looks great! I now have something to do on Saturday morning. Is it too much trouble to as you to get a few quick, rough measurements?

No trouble, I can measure it tomorrow.

[skeeter]

Here are the measurements of the rack. I added the front piece on the ground today, so I went over 10'. Had to add 2 more 90 degree elbows as well. To make this rack w/ the front support, you'll need:

2- 8"
3-16"
2-14"
2-25"
4-T's
6-90 degree elbows

[clay01]

very nice

[salth2o]

Here are the measurements of the rack. I added the front piece on the ground today, so I went over 10'. Had to add 2 more 90 degree elbows as well. To make this rack w/ the front support, you'll need:

2- 8"
3-16"
2-14"
2-25"
4-T's
6-90 degree elbows

Thanks!!!

[skeeter]

Thanks!!!

no problem

[zcole04]

Very nice looking rack.

[Ranchingaggie]

Thanks for the pic and measurements.

What is the distance (gap) b/w the two uprights for the bow rest? Basically how much gap between the two "T"s on the bottom piece of pipe. Thanks...

[skeeter]

Thanks for the pic and measurements.

What is the distance (gap) b/w the two uprights for the bow rest? Basically how much gap between the two "T"s on the bottom piece of pipe. Thanks...

16"

[jeremy360]

never thought id say this....but...nice rack Dan.

[Bowtechlady]

Nice work

[conroetomkat]

Believe it or not I started to build one of these just like yours but it didn't work right for my bow so I made some changes. That stand went to the lease but this is what I came up with for the house.

[pazthru]

ConroeT-kat,
If you leave the holder outside, don't forget to drill some drainage holes somewhere.
I am speaking from experience with the one I built similar to yours.

[conroetomkat]

I know of what you're saying Pazthru. I can't drill the bottom of the holders because of the way it is put together. I just lay it over so rain doesn't get in the tubes.