1982 WW 16’ stock trailer refurbish

[JD4020]

Good luck with the rehab. For lights I highly suggest upgrading to LED over the standard trailer lights. Mine actually work now.

[Cliff Dog]

Gonna be a good one

[bassmatt72]

Looks like a cool project, it reminded me I have to do wheel bearings on my utility trailer.

[TXBRASS]

Get those bones wire wheeled and coated in Ospho and then painted. Might as well do the metal right when the floor is out.


Sent from my iPhone using Tapatalk

[chunkinlead]

Get those bones wire wheeled and coated in Ospho and then painted. Might as well do the metal right when the floor is out.


Sent from my iPhone using Tapatalk

How have I never heard of Ospho? Thanks for that info.


Sent from my iPhone using Tapatalk

[rferg84]

How have I never heard of Ospho? Thanks for that info.


Sent from my iPhone using Tapatalk

Ospho is great.

[chunkinlead]

Started repacking bearings yesterday. Had to run by and get the inner seals as I messed them up getting them out. Also picked up some 2x10x10 to cut in 1/2 for the flooring. Going to try and get some Ospho at least for the bottom & angle iron the floor will be on. Probably won’t do the whole trailer yet. Just going to try and stop it from rusting out more than it currently is.


Sent from my iPhone using Tapatalk

[Deano5x]

Sent from my iPhone using Tapatalk

[Deano5x]

Sent from my iPhone using Tapatalk

[Deano5x]

Here’s one I’ve been working on for my daughters show pigs , took middle divider gate out and used it for the walk on loading ramp . Had a lot of cancer rust we had to replace on roof and sides .


Sent from my iPhone using Tapatalk

[Dusty Britches]

Yeah, Ospho is fantastic. Make sure you wear rubber or nitril gloves!

[chunkinlead]

Sent from my iPhone using Tapatalk

Nice! That’s probably the same model as mine.

For the cancer rust at the bottom has anyone tried to cut it out and weld square tubing so that there is a gap at the bottom similar to big bend trailers so that it can’t rust out again?


Sent from my iPhone using Tapatalk

[Deano5x]

Trying to figure out getting a new front window and gasket now , any ideas ?


Sent from my iPhone using Tapatalk

[chunkinlead]

Trying to figure out getting a new front window and gasket now , any ideas ?


Sent from my iPhone using Tapatalk

What about just buying plexiglass from Amazon?


Sent from my iPhone using Tapatalk

[chunkinlead]

Lights rewired & floor installed. Took its first trip with livestock this weekend.


Sent from my iPhone using Tapatalk