So you have a hunting rifle you've used for years, but it's loud. You've done your research and acquired a legal suppressor, but this old rifle is not threaded.. and there is not enough meat on the barrel to get it threaded without severely chopping it, thereby neutering it's ballistic properties.
Here is a simple solution that if executed correctly can bring back the enjoyment out of shooting these old rifles for a little $
thread job was $80 .. adapter was $15
this is a remington 700 in 243 22" barrel threaded , no recrown , no chopping.
Rifle was left full length. it slings 95 grain ballistic tips at a tad over 3000ft/s
[ame="https://www.youtube.com/watch?v=ncFgmIydezE"]Installing a suppressor on a traditional 243 rifle - YouTube[/ame]
Here is a simple solution that if executed correctly can bring back the enjoyment out of shooting these old rifles for a little $
thread job was $80 .. adapter was $15
this is a remington 700 in 243 22" barrel threaded , no recrown , no chopping.
Rifle was left full length. it slings 95 grain ballistic tips at a tad over 3000ft/s
[ame="https://www.youtube.com/watch?v=ncFgmIydezE"]Installing a suppressor on a traditional 243 rifle - YouTube[/ame]
Comment