Originally posted by Drewboy22
View Post
Announcement
Collapse
No announcement yet.
CNC router projects! who has one?
Collapse
X
-
Originally posted by rdorsett View PostSounds good. Excited to start fiddling with it
Check your belts and wheels before you start running the machine.
Check your zero and retract heights too!
Did you get it to do something in particular or just mess around with?
Check out ben Myers. he has been a big help to get started. https://www.youtube.com/c/MyersWoodshop/videos
Comment
-
Looking at getting a CNC soon. I know the sky is the limit with tooling. For those that have a machine already would this be a decent set to start with? I know there will be a learning curve and tools can be damaged. Or should I steer away from a kit and get a few basic bits and go from there.
https://www.toolstoday.com/v-11830-ams-138.html
Comment
-
Originally posted by sendit View PostLooking at getting a CNC soon. I know the sky is the limit with tooling. For those that have a machine already would this be a decent set to start with? I know there will be a learning curve and tools can be damaged. Or should I steer away from a kit and get a few basic bits and go from there.
https://www.toolstoday.com/v-11830-ams-138.html
I think these are a must.
Flatting bit(for your spoilboard)
1/4 Down cut
90 degree v bit
1/8 down cut
compression bit(if your cutting plywood)
toolstoday and bits & bits are two of the big ones.
Comment
Comment