Pin settings?

[limbratgod333]

What are yalls lim set at? Been shooting 20'30'40 yds for years. But new set up there's not enough adjustment between 20 and 30 pin. 20s zeroed but 30 is still high. Going to have to elevate 20 pin 3 to 4in for 30yds

[happy bowhunter]

20,30,40,50,

[asu-indian]

25,35,45,55

[limbratgod333]

But what if your pins wont get close enough to go from 20 to 30 try to set my 30 but still shooting 3 to 4 high

[Shane]

But what if your pins wont get close enough to go from 20 to 30 try to set my 30 but still shooting 3 to 4 high

If you're shooting that fast and flat, go to 30, 40, & 50. Sounds like you could use 1st pin for everything 30 and closer pretty easily. Maybe hold slightly low for 15-20 yard shots.

[jds247]

I shoot 20 30 40 . 40 pin is my slider .. I had to shoot heavier arrows to get some pin gap..

[Traildust]

what size pins

[GA Bowhunter]

One pin at 20 yards.

[hully1029]

Single .019 @ 25 yards

Sent from my SM-G955U using Tapatalk

[Pineywoods]

20 30 40 50 60

[RS3]

30,40,50,60. Set your top pin at 30 and practice at shorter distances to learn how high it hits at those distances. My old Hoyt Vectrix isn’t very fast, but only hits about 2 inches high at 20.

[Jon B]

20 30 40 50 60

^^^^^

[gonehuntin68]

Set top pin at 25 and then 40, 50. Your 25 yard pin should be good from 20-30. Might be a inch high at 20 and a inch low at 30.

[CTR0022]

15-30-45

[Aggiehunter08]

20 to 100, wherever I dial it