I've got a bunch of 55 gallon blue UV water barrels and wondering if they'd be ok to make deer feeders out of. Anybody used plastic ones before? I've only done metal but couldn't see why the plastic wouldn't work. These are very rigid.
Announcement
Collapse
No announcement yet.
Plastic Barrel for feeder?
Collapse
X
-
If you never let it go empty and do not install a varmint cage, the squirrels will usually leave it alone.
I had one of the cheap Remington plastic barrel feeders from Academy.
Every thing was fine for 2 years, then I let it go empty one spring.
Squirrels chewed holes in the barrel to get to the little bit of corn left inside.
IMO, I'd stick with metal barrels though and use the plastic water barrels for hauling liquids.
Comment
-
Originally posted by mdmorrow View PostI should have clarified that intend to do a gravity protein setup. I can buy some metal barrels but I've got a bunch of these so might make use of them.
Also, if they can get the feed out of the spout, they generally won't try to get into the barrel.
I'd see if you could find someone to trade you some metal barrels for your plastic ones though.
Comment
-
I make all of mine out of plastic barrels cause they are free to me.
you have to make a varmint cage around the electronics
also I use carpet tack strips up each of the 3 legs with the spikes sticking out
That keeps the coons and the squirrels at bay.
Most carpet co will give you 6 of them of charge you .25 each for them
or buy American Hunter Feeder with Timer and Varmint Guard shocks them 36.00 at Sportsmansguide.com
or buy Shark Teeth™ Deterrent Strips from them for 18.00 for 3 pack
Comment
-
I once had a metal feeder, but with a plastic lid. Squirrels chewed a hole in the lid. They apparently hopped in and out until the corn level got too low for them to jump back out. Three of them died in there. The first dead squirrel body to reach the bottom clogged the feeder. It rained in through the hole they chewed and I came back to a mixture that would gag a maggot.
Comment
Comment