Ladder plans for Elevated Blind

[careybirdwell]

I'm in the process of building a Elevated bow blind. I'm using some of the elevator brackets with 5ft legs. Does anyone have any suggestions or ideas for for a ladder. Thought I would ask before attempting to make a set

[Low Fence]

If you can weld, some 1 1/2” 14ga square tubing would be fast, cheap and easy.

If not, for 5 ft of ladder some treated 2x4 screwed together?

[Throwin Darts]

Two 2x6s with some 2x4s cut to 18 inches every 18 inches for steps.

Also with the elevators don’t go too short. Throw some 8 foot legs in there instead of the 5 footers. You’ll be glad you did.




Sent from my iPhone using Tapatalk

[careybirdwell]

Two 2x6s with some 2x4s cut to 18 inches every 18 inches for steps.

Also with the elevators don’t go too short. Throw some 8 foot legs in there instead of the 5 footers. You’ll be glad you did.




Sent from my iPhone using Tapatalk

I want to put it under 4 live oaks and a 5ft with a 6'3" box, I still might be too tall, I dont want to have to cut a bunch of limbs

[brokeno]

Make sure your ladder has plenty of angle. Nothing harder than to carry all your crap up and down a straight up ladder.

[luv2hunt]

[ATTACH]1003758[/ATTACH]

[LFD2037]

Can you weld?
4" c-channel for the sides & the steps works great & lasts forever.

[dosshunter]

I make mine out of 6” C purlin.




Sent from my iPhone using Tapatalk

[hogslayer78]

1" square tubing would be perfect. If you cant weld I know someone who can build for you

[EliteDriver]

Here's one I built...

[Matt2006Martin]

Welding up some square tubing pretty cheap 1-1 1/2 and will last forever